AutoCAD Plant 3D Forum
Welcome to Autodesk’s AutoCAD Plant 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Plant 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Mirrored new Iso symbol (with new end type)

5 REPLIES 5
Reply
Message 1 of 6
serafin.albiero
1543 Views, 5 Replies

Mirrored new Iso symbol (with new end type)

Greetings All !!

 

Please help! I have a problem with one of my custom iso symbols. I have tried this solution but unsuccess:

http://forums.autodesk.com/t5/AutoCAD-Plant-3D/Iso-Symbol-Works-Sometimes/m-p/3624432#M7063

 

I have created a new end type TC for Port 1 (S1), and:

 

- Port 2 (S2): BV

- Symbol Type: FLANGE

- Symbol SKEY: My mapped skey symbol, aka MNDT

- Component Category: Flange (Welding neck flange)

 

See images:

 

New End Type

 

Erro-TC_4.jpg

 

Symbol Block with FlipY parameter and Flip1 action:

 

Erro-TC_2.jpg

 

The isometric with mirrored TC Niple symbol, 3D (green box) ok:

 

Erro-TC_1.jpg

 

What am I doing wrong?

Thanks in advance!

 

P3D 2013.

 

PS.: If I change Port 1 (S1) to FL, isometric generates succesfully with no mirrored symbols!

Serafin A. Albiero Jr.
Tags (2)
5 REPLIES 5
Message 2 of 6

Dear Autodesk Supports

 

I have Issue in isometric symbol new created for more than 2 ports pleas find the attached photos for more clarification

 

in my issue please it's very urgent

 

Ahmed Helal

Message 3 of 6

Did you ever find the solution to the problem? I do have the same problem..

Message 4 of 6

Not yet... Unfortunatelly till now we need to flip 2D blocks manually, and no autodesk support or answer about that issue. I hope someone tell us that this annoying behavior is not present on 2014, or at least they are working on a workaround/fix.
Serafin A. Albiero Jr.
Message 5 of 6

Thanks for the quick answer!

 

Unfortunately I do use the 2014 version..

Message 6 of 6
m_madrzak
in reply to: Erik_Halvarsson

Hi, 

try to change Small bore piping.. to the smallest dimension (check attachment) in Title blok and Display 

small pipe sometimes makes some issue 

 

Regards

Michał Mądrzak
Plant Specialist

m.madrzak@mat.net.pl
Phone +48 12 252-06-25
Mobile. 693-015-910

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost