AutoCAD Plant 3D Forum
Welcome to Autodesk’s AutoCAD Plant 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Plant 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

ISSUE WITH 45 TEE's

9 REPLIES 9
Reply
Message 1 of 10
philip
591 Views, 9 Replies

ISSUE WITH 45 TEE's

Started a project in 2012 and had things working okay had run some isos off and all was good (image "45-2012")

 

Then migrated to 2013 and added a whole lot of new pipes reran some iso which have changed and now am finding that 45 tee's are not working anymore(image "45-2013")

 

Have started a new project and created a "custom part" and found that the issue is there still (thought it might be some of our custom Isometric symbols).

 

is this a bug with 2013??

  

9 REPLIES 9
Message 2 of 10
Venkatesan.A
in reply to: philip

Philip,

 

Thanks for highlighting.

A change request has been opened relating to this issue.



Venkatesan.A
Support Specialist
Product Support
Autodesk, Inc.
Message 3 of 10
philip
in reply to: Venkatesan.A

any idea if this may come out as a fix this year or will it be in the next release of Plant (2014)?

Just so i know either to use or not to use 45 tees in upcoming projects.

Message 4 of 10
Venkatesan.A
in reply to: philip

Sorry for the late reply, I am in discussion about this issue, please give me some time.

I will update you asap.



Venkatesan.A
Support Specialist
Product Support
Autodesk, Inc.
Message 5 of 10
philip
in reply to: Venkatesan.A

thanks.

Message 6 of 10
pata825
in reply to: philip

Have we heard anything on this yet? I am having similar issues with lateral. Anyone found a good workaround? was thinking about grabbing the block from 2012.

Message 7 of 10
philip
in reply to: pata825

nothing as yet, I ended up doing a lot of manual works to get it looking half right so we could get job out.

Message 8 of 10
pata825
in reply to: philip

Manual work to your isos, or were you able to figure out a workaround to get the isos to come out right?

Message 9 of 10
philip
in reply to: pata825

I changed the isos after they were made by Plant.

Only workaround i can think of is to create a user SKEY, i have not tried this yet. 

Message 10 of 10
Venkatesan.A
in reply to: pata825

A Hotfix has been issued that address this issue. The link is as below.
http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=20164796&linkID=14116968
Let me know if this works fine for you. 

 


______________________________________________________________

If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!

 



Venkatesan.A
Support Specialist
Product Support
Autodesk, Inc.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost