AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
Valued Contributor
57 Posts
3 Kudos
Registered: ‎12-16-2011
Post 1 of 3
Accepted Solution

Isometric comes out with BLUE text font

1488 Views, 2 Replies
11-05-2012 09:55 PM

Even if I try to print with monorcome both to pdf and to paper, I get blue font on the BOM, CUT & WELD list.

I can not find any way to chance this font into black in the project set-up and they come out as blocks on the isometric (which makes things time consuming for us) so we struggle to change it into black on the 2D drawing aswell.

Any help would be highly apprecieted.

 

See attachment.

Go to Project setup

Isometric DWG Settings

Title Block and Display

Setup Title Block

Click on BoM Table

Click on Gray area around table at top left

Right click grey square

Locking -> Unlocked

Right click grey square

Properties -> Text Color change to prefered colour

 

Save changes....

 

 

Valued Contributor
75 Posts
13 Kudos
Registered: ‎11-04-2010
Post 2 of 3

Re: Isometric comes out with BLUE text font

11-06-2012 07:59 AM in reply to: vannmannen

Go to Project setup

Isometric DWG Settings

Title Block and Display

Setup Title Block

Click on BoM Table

Click on Gray area around table at top left

Right click grey square

Locking -> Unlocked

Right click grey square

Properties -> Text Color change to prefered colour

 

Save changes....

 

 

Valued Contributor
57 Posts
3 Kudos
Registered: ‎12-16-2011
Post 3 of 3

Re: Isometric comes out with BLUE text font

11-06-2012 04:40 PM in reply to: phwatso

Fantastic. That solved it all !!!

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!