AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
Valued Contributor
63 Posts
0 Kudos
Registered: ‎03-13-2009
Post 1 of 9

ISO Template

496 Views, 8 Replies
03-02-2010 07:03 AM
Hello,

Is there a guide for making a custom template?
How to change the north arrow,
Change text height of the dimension,
custom partlist, ....

If anyone has a good template maybe you can share it?
Employee
20 Posts
7 Kudos
Registered: ‎04-23-2008
Post 2 of 9

Re: ISO Template

03-05-2010 03:51 PM in reply to: arjan.gorinsekéman-engineering.be
Hi,

I am not sure if there is an explicit document that details how to make a custom template. The Plant3d help documentation on Iso should help you out. You will need to go through the project setup in Plant3D to set the north arrow.

In brief, north arrow can be changed using the drawing setup UI. Text height can be changed by using switches 4 and 27 in the opl file. There is no UI exposed currently to set these two switches.

Switch 4 to control the text size of Dimensions, Coordinates, Message Text, etc.
Switch 27 to control the material list text.

As for a template, maybe someone has it.

HTH.

Ratti.
Autodesk.
Autodesk, Inc.
Valued Contributor
63 Posts
0 Kudos
Registered: ‎03-13-2009
Post 3 of 9

Re: ISO Template

03-08-2010 06:18 AM in reply to: arjan.gorinsekéman-engineering.be
Thanks this is working.
Is there an explanation for all the switch number?
Employee
23 Posts
0 Kudos
Registered: ‎02-01-2007
Post 4 of 9

Re: ISO Template

03-08-2010 06:28 AM in reply to: arjan.gorinsekéman-engineering.be
Hi Arjan

Unfortunately, we do not have any good whitepaper on this.
A template can be created two way, through the 3D Plant Isogen settings, or Alias OPT editor.
I do have a custom template with custom MTO etc. See attachment.

Change the path in the FLS file to yours path.
You can use the Alias editor tool for Isogen configuration. Just search the internet for Alias Isogen editor, and you will find several document for download.

Regards,
Dag Austrheim

Autodesk
Valued Contributor
63 Posts
0 Kudos
Registered: ‎03-13-2009
Post 5 of 9

Re: ISO Template

03-09-2010 07:02 AM in reply to: arjan.gorinsekéman-engineering.be
Hello,

then you send me a link where i can download alias isogen editor?
Employee
23 Posts
0 Kudos
Registered: ‎02-01-2007
Post 6 of 9

Re: ISO Template

04-26-2010 09:23 AM in reply to: arjan.gorinsekéman-engineering.be
Hi

This has to be sent by your reseller. If you can send me the name of your reseller, then I can ask him to send it to you.

R.
Dag Austrheim
Autodesk
Employee
23 Posts
0 Kudos
Registered: ‎02-01-2007
Post 7 of 9

Re: ISO Template

04-26-2010 09:23 AM in reply to: arjan.gorinsekéman-engineering.be
Hi

This has to be sent by your reseller. If you can send me the name of your reseller, then I can ask him to send it to you.

R.
Dag Austrheim
Autodesk
Valued Contributor
63 Posts
0 Kudos
Registered: ‎03-13-2009
Post 8 of 9

Re: ISO Template

04-26-2010 11:32 PM in reply to: arjan.gorinsekéman-engineering.be
Reseller is CADAC
http://www.cadac.com/Pages/index.aspx
Employee
23 Posts
0 Kudos
Registered: ‎02-01-2007
Post 9 of 9

Re: ISO Template

04-27-2010 11:54 PM in reply to: arjan.gorinsekéman-engineering.be
Hi Arjan

I need you to send me a email with your name and company name, so I can send the neseccearly contact information.
Send the email to me.

dag.austrheim(at)autodesk.com
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!