AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
Active Contributor
rchiasson
Posts: 45
Registered: ‎11-18-2010
Message 11 of 13 (109 Views)

Re: IGS extension

02-04-2013 06:49 AM in reply to: joaquinr

After importing the IGS file following the steps stated above, saving the file, it still is at 14Mb. After doing this you can then go through the steps doing the PLANTPARTCONVERT

 

Are you going to be using this valve multiple times or is it a one time use component. If you are going to be using this valve frequently, you WILL run into model size issues and performance issues. I highly recommend not using this for your modeling and instead build the valve in Plant 3D using existing valve components.

Product Support
gersteb
Posts: 169
Registered: ‎09-20-2010
Message 12 of 13 (104 Views)

Re: IGS extension

02-04-2013 06:59 AM in reply to: joaquinr

In 2013 you can use the IMPORT command. Just type it in the command line. A browser will pop up. Select IGES for the file type and browse to your igs-file. You don't need here the subscription advantage package.



Bernd Gerstenberger
Contributor
joaquinr
Posts: 21
Registered: ‎01-10-2013
Message 13 of 13 (91 Views)

Re: IGS extension

02-04-2013 10:39 PM in reply to: joaquinr

thank you very much everyone for your answers to my questions.
one more problem that I have taught to solve, one more thing I have learned

 

 

joaquin rubio

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.