AutoCAD Plant 3D Forum
Welcome to Autodesk’s AutoCAD Plant 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Plant 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

gasket info in the model

5 REPLIES 5
SOLVED
Reply
Message 1 of 6
GSC_HAYA
2643 Views, 5 Replies

gasket info in the model

Hello

 

when I press ctrl and click a flange connection I can get info for used bolt set but not for the gasket. Where can I see the used Gasket?

 

 

Thanks

 

Guido

Plant3D 2022 German
WIN10 Pro
5 REPLIES 5
Message 2 of 6
AndyDavisCadline
in reply to: GSC_HAYA

Hi,

 

Simply ctrl-click on the gasket.

 

You may need to change the visual style to see the gasket; you may also find it useful to enable selection preview in your Options.

 

Regards,

Andy


Andy Davis

Industry Specialist
Cadline Ltd.
Message 3 of 6
vannmannen
in reply to: GSC_HAYA

Following up this one: No, we can not change gasket, only bolts when ctr-right click on the gasket. See attachment

Message 4 of 6

Change to Wireframe view and select the gasket



Tomislav Golubovic
Technical Specialist - Plant and Infrastructure
Autodesk Australia / New Zealand
Autodesk, Inc.
Autodesk ANZ YouTube Channel
Message 5 of 6
ugurbalbay
in reply to: GSC_HAYA

Hello,

 

Yes we can see the gasket when we go into the wireframe but we can not change the gasket!!!!!

 

 

How we can change gasket in the programme if we have more than one gasket in the spec.

 

 

Message 6 of 6

The Gaskets and Bolts are inserted as a Connector, so they are grouped. To change either one, you press the CTRL key and select the gasket. Then you can change the properties or substitute it.



Tomislav Golubovic
Technical Specialist - Plant and Infrastructure
Autodesk Australia / New Zealand
Autodesk, Inc.
Autodesk ANZ YouTube Channel

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost