AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
New Member
joachim.oelschlagel
Posts: 1
Registered: ‎08-16-2011
Message 1 of 7 (660 Views)
Accepted Solution

Custom Stub-in to elbows

660 Views, 6 Replies
01-24-2013 12:03 AM

Hi,

 

I have tried to make stub-ins in elbows for long thermo wells since 2011 release, and it seems like it's still not possible in 2013 release. Someone knows of a workaround to this?

 

Snip below illustrates where i would like to make the stub in: (Note that it's not connected in my example)

24-01-2013 08-46-23.jpg

*Expert Elite*
dave.wolfe
Posts: 678
Registered: ‎12-04-2009
Message 2 of 7 (647 Views)

Re: Custom Stub-in to elbows

01-24-2013 06:46 AM in reply to: joachim.oelschlagel

Click the + grip off the corner of the elbow, hit S for Size and enter the size you want.   THe insertion options are somewhat limited, but you can use the connectionoffset option to move it up our down on the elbow.

 

 

Dave Wolfe
Isaiah 57:15

ECAD, Inc.
Tips and Tricks on our blog: Process Design, from the Outside

A P3D Authorized Reseller
New Member
liuyong816
Posts: 2
Registered: ‎10-02-2010
Message 3 of 7 (623 Views)

Re: Custom Stub-in to elbows

01-24-2013 05:29 PM in reply to: dave.wolfe

Hi dave:

     I want to show the connection offset value on the iso to reduce the counculation work from the connection coordination, is there any possible way to config?

     Thanks a lot !

Active Contributor
Layout-Bob
Posts: 38
Registered: ‎01-05-2011
Message 4 of 7 (593 Views)

Re: Custom Stub-in to elbows

01-27-2013 11:17 PM in reply to: joachim.oelschlagel

Thanks Dave,

 

I managed to get it right on a horizontal pipe that turns upwards. Then I tried on a horisontal bend (which did not work), and then I tried to continue on the first pipe run (see attached picture).

 

In both cases I use your method with "connectionoffseT" and I use distance: -((Bend radius)/2)

 

Slightly confused :smileyfrustrated:

 

28-01-2013 08-09-46.jpg

Active Contributor
Layout-Bob
Posts: 38
Registered: ‎01-05-2011
Message 5 of 7 (584 Views)

Re: Custom Stub-in to elbows

01-28-2013 01:22 AM in reply to: Layout-Bob

Hmm.

 

Seems like the original post were posted from my suscription-center login which is my real name.

 

Regards

Joachim

*Expert Elite*
dave.wolfe
Posts: 678
Registered: ‎12-04-2009
Message 6 of 7 (575 Views)

Re: Custom Stub-in to elbows

01-28-2013 07:10 AM in reply to: Layout-Bob

Yea, it doesn't seem like there are enough options on the offset.  

Dave Wolfe
Isaiah 57:15

ECAD, Inc.
Tips and Tricks on our blog: Process Design, from the Outside

A P3D Authorized Reseller
New Member
kaisakol
Posts: 1
Registered: ‎05-27-2013
Message 7 of 7 (428 Views)

Re: Custom Stub-in to elbows

05-27-2013 05:43 PM in reply to: Layout-Bob

Thank you.

 

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.