AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
Mentor
Ahmed1081975
Posts: 220
Registered: ‎09-29-2011
Message 1 of 6 (307 Views)
Accepted Solution

Creating Equipment (Vessel)

307 Views, 5 Replies
01-17-2013 11:30 AM

Dear Autodesk team Supports

I have issues for creating the equipment (Vessel) I tried to made one vessel by  Plant 3D I faced problem to get the shape what I want, I did by CADWORX Equipment and I attach the both did by CADWORX & PLANT 3D  did I missed something in the plant 3D??

 

Thanks,

Ahmed Helal

Hi,

 

Try setting to value for dimension SF for the 2:1 Torispheric Head to 500 rather than 50.

 

In the image below, SF=50 is on the left and SF=500 is on the right:

 

Vessel.png

 

I hope this helps.

 

Thanks,
Dan

Product Support
Dan.Scales
Posts: 325
Registered: ‎03-05-2010
Message 2 of 6 (256 Views)

Re: Creating Equipment (Vessel)

01-21-2013 06:43 AM in reply to: Ahmed1081975

Hi,

 

Try setting to value for dimension SF for the 2:1 Torispheric Head to 500 rather than 50.

 

In the image below, SF=50 is on the left and SF=500 is on the right:

 

Vessel.png

 

I hope this helps.

 

Thanks,
Dan



Dan Scales
Mentor
Ahmed1081975
Posts: 220
Registered: ‎09-29-2011
Message 3 of 6 (244 Views)

Re: Creating Equipment (Vessel)

01-21-2013 12:10 PM in reply to: Dan.Scales

Thanks Dan For Your Reply, it's Working but i suggestion for this point butter if give one more dimension For

Torispheric head (H) for Height.

One more Issue for Creating Nozzle in the Equipment’s. I finalize the all nozzles in the equipment and get some new

Changes like (Re numbering the nozzle & Delete some of Nozzle how i can do that

Regards,

Ahmed Helal

Product Support
Dan.Scales
Posts: 325
Registered: ‎03-05-2010
Message 4 of 6 (241 Views)

Re: Creating Equipment (Vessel)

01-22-2013 01:26 AM in reply to: Ahmed1081975

Hi,

 

If you Ctrl+Left Click the nozzle you should see a pencil icon. Click the pencil and you can edit the nozzle tags:

 

Nozzle.png

 

Could you "accept as solution" if this has solved the issue for you?

 

Thanks,

Dan



Dan Scales
Mentor
Ahmed1081975
Posts: 220
Registered: ‎09-29-2011
Message 5 of 6 (230 Views)

Re: Creating Equipment (Vessel)

01-22-2013 04:53 AM in reply to: Dan.Scales

Thanks Dan,  got it

 

Regards,

 

Ahmed Helal

New Member
CouldflyLiu
Posts: 1
Registered: ‎01-16-2013
Message 6 of 6 (174 Views)

Re: Creating Equipment (Vessel)

01-26-2013 09:40 PM in reply to: Ahmed1081975

What is the SF meaning? Why does it like what you said, the dimension is 50mm rather than 500mm in real manufacture SF showed in the schema of PLD, Is there any more explaination?

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.