AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
Member
Lars_Petersson
Posts: 5
Registered: ‎02-06-2012
Message 1 of 3 (165 Views)
Accepted Solution

Correlation between port numbers in custom geometry.

165 Views, 2 Replies
05-21-2012 12:32 AM

Hi all.

 

Can anyone tell me if there is a correlation between port number and the order in which you add ports for custom geometries using PLANTPARTCONVERT command?

 

Does the first created port always get number 1? Or is it controlled somehow in spec editor?

 

Thanks

Correct!

The port numbers in the spec editor are the port center points what you selected after the PLANTPARTCONVERT.

So the first selected point will be the port 1, the second will be the port 2 and etc...

Mentor
attila_vallyon
Posts: 255
Registered: ‎11-03-2009
Message 2 of 3 (161 Views)

Re: Correlation between port numbers in custom geometry.

05-21-2012 03:14 AM in reply to: Lars_Petersson

Correct!

The port numbers in the spec editor are the port center points what you selected after the PLANTPARTCONVERT.

So the first selected point will be the port 1, the second will be the port 2 and etc...

Regards,
Attila Vallyon
Member
Lars_Petersson
Posts: 5
Registered: ‎02-06-2012
Message 3 of 3 (154 Views)

Re: Correlation between port numbers in custom geometry.

05-21-2012 04:37 AM in reply to: attila_vallyon

Great!

 

Thanks Attila

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.