Hi Autodesk Supports,
The New Release Form CadWorx2013R2 it can be now converting the specs from AutoCAD Plant 3D to CawdWorx
Specs. And from the other way the AutoCAD Plant 3D up till now can't convert the Cadworx2013 Specs to Plant 3D
Specs, there no update for AutoCAD plant 3D for these issue
Select 'File - Convert - CadWorx Spec' from the menu in the spec editor (see attached snapshot). A dialog box will open and you have to select your CADWorx spec file (*.spc), your standard library with referenced files, your datafile.tbl and the target folder for the converted specs.
Please, inform me if I could help you
Thanks for Your Reply, I think you didn't get my point, my issue converting Specs from CadWorx2013 Version in the
previous version no problem but with new version Plant 3D can't read even the extension file ( .prj) Befor Was spec
file Extension in CadWork (.spc)
I hope my issue be clear now
Thank you for clearing here the point. Yes, this is currently not possible. I will ask internally if there is already an update for the version 2014 here or if there are additionally plans for 2013.
I've got now the answer of the development here. They were not aware of this change in the new CadWorx 13R2 release. I have logged now this issue to them and they will work for this topic here.
As you note, the best use of this forum is to leverage the experience of other users. This isn't the best (or proper) location to log feature requests or get direct AutoDesk support. Unless there is a *lot* of demand for this then it probably won't be added to the product while there are higher priorities.
If there is enough demand to make it worth their while a third-party solution might be an option.
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.