AutoCAD Plant 3D Forum
Welcome to Autodesk’s AutoCAD Plant 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Plant 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Bolt set designation in BOM

7 REPLIES 7
SOLVED
Reply
Message 1 of 8
bapan_b
2065 Views, 7 Replies

Bolt set designation in BOM

For Pure Metric Project, Bolt sets are designated in BOM of Isometric drawing is 10x150 (bolt size in mm x length in mm). Can I designate these bolt set like M10x150 LG.

 

 

15 Years Experience in Piping
7 REPLIES 7
Message 2 of 8
Dan.Scales
in reply to: bapan_b

Hi,

 

I will log a feature enhancement request for the ability to add a prefix and suffix to the bolt sizes in the BOM.

 

Thanks,
Dan



Dan Scales
Message 3 of 8
Dan.Scales
in reply to: bapan_b

Hi,

 

 It is possible to get the result you want by adding two "styles" in the isoconfig.xml. One for the bolt diameter and one bolt length and then setting the relevant styles to the BoltDiameterStyle and BoltLengthStyle:

 

BoltStyles.png

 

The above change will give the following result in the BOM:

 

BoltBOM.png

 

Thanks goes my colleague Jarrod Mudford for this tip!

 

I hope this helps.

 

Thanks,
Dan



Dan Scales
Message 4 of 8
bapan_b
in reply to: Dan.Scales

Thank you very much Dan.
15 Years Experience in Piping
Message 5 of 8
wowiwo
in reply to: Dan.Scales

Hi,
May you tell me which software used to edit the isoconfig.xml?
Thank you~
Message 6 of 8
wowiwo
in reply to: Dan.Scales

tested, it can be edit by txt.
Message 7 of 8
bapan_b
in reply to: wowiwo

Notpad only.

15 Years Experience in Piping
Message 8 of 8
ebechen
in reply to: bapan_b

There is one other way

Find the file "BoltSizeMappings.xml" (under folder [Isometric])

Change every "M#" to "MM#"

圖片 23.png

 

 

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost