AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Reply
Mentor
PatrickByrne
Posts: 165
Registered: ‎10-06-2010
Message 1 of 2 (421 Views)

Annotate 3D Models in Paperspace

421 Views, 1 Replies
09-23-2012 03:30 PM

We create our arrangement drawings by using xrefs of our steelwork and pipework models, these are very large and contain Prosteel objects. At this stage we will not be using Plant 3D orthographic views.

 

These arrangement drawings shall be dimensioned and annotated in paperspace. CadWorx could do this by retrieving the line number, or tag information from the xref model and placing it in Paperspace. Can Plant 3D annotate the xrefs of the pipe models similar to the way it annotates the orthographic views.

 

Thanks

Product Support
VinodBalasubramanian
Posts: 646
Registered: ‎09-30-2007
Message 2 of 2 (328 Views)

Re: Annotate 3D Models in Paperspace

10-08-2012 06:56 PM in reply to: PatrickByrne

This is not possible at the moment. We are currently looking for a possibility to do this through programming. I will keep you posted.



Vinod Balasubramanian
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.