AutoCAD Plant 3D General DIscussion

AutoCAD Plant 3D General DIscussion

Active Member
Posts: 6
Registered: ‎06-12-2012
Message 1 of 2 (170 Views)

Actuators in Pipe Spec

170 Views, 1 Replies
07-03-2012 06:44 AM

I added an Actuator to a piping spec, but it does not appear anywhere in the spec. Where sould the actuator be listed?


Thank you


Distinguished Contributor
Posts: 148
Registered: ‎01-31-2012
Message 2 of 2 (135 Views)

Re: Actuators in Pipe Spec

07-08-2012 10:29 PM in reply to: dflores69



You can find the actuators here (german version): Rohrklassen\DIN-Wandstärken zuweisen...(piping classes\wall thickness...). Then you can see the form like in the attachment.


Delete an actuator (earlier answer form here):


You can do this by opening the spec with SQLite DatabaseBrowser but this is not unperilous and not supported. So be aware that you have made a copy of the two spec files (*.pspx and *.pspc). In SQLite DatabaseBrowser you have to look for the tables 'ValveActuator', 'ValveActuatorMap' and 'EngineeringItems'. There you can look for your actuators and delete them.




Plant3D 2014 German
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD Plant 3D Category!

The AutoCAD Plant 3D forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.