AutoCAD P&ID General Discussion

AutoCAD P&ID General Discussion

Reply
Mentor
craig.wood
Posts: 225
Registered: ‎02-20-2012
Message 1 of 3 (279 Views)
Accepted Solution

Validation - One Drawing at a Time; Possible?

279 Views, 2 Replies
06-29-2012 01:31 AM

Is it possible to run the validation utility for only one drawing at a time, or even for a select group of drawings? It seems to me that you have to run it for everything listed in your project. I would like to be able to allow users to run it as they finish drawings one at a time. Is this possible?

 

Thanks,

Craig

Yes, right+click on the drawing in the project manager and select Validate.  You won't get the Plant vs P&ID comparison, but it will check just the one file.

 

6-29-2012 9-05-49 AM.png

*Expert Elite*
dave.wolfe
Posts: 719
Registered: ‎12-04-2009
Message 2 of 3 (274 Views)

Re: Validation - One Drawing at a Time; Possible?

06-29-2012 06:10 AM in reply to: craig.wood

Yes, right+click on the drawing in the project manager and select Validate.  You won't get the Plant vs P&ID comparison, but it will check just the one file.

 

6-29-2012 9-05-49 AM.png

Dave Wolfe
Isaiah 57:15

ECAD, Inc.
Tips and Tricks on our blog: Process Design, from the Outside

A P3D Authorized Reseller
Plant 3d Wish list: https://plant3d.uservoice.com/
Mentor
craig.wood
Posts: 225
Registered: ‎02-20-2012
Message 3 of 3 (257 Views)

Re: Validation - One Drawing at a Time; Possible?

07-01-2012 04:14 PM in reply to: dave.wolfe

Thanks Dave!

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD P&ID Category!

The AutoCAD P&ID forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.