AutoCAD P&ID General Discussion

AutoCAD P&ID General Discussion

Reply
Contributor
ronjanssen30
Posts: 21
Registered: ‎01-26-2010
Message 1 of 6 (1,154 Views)

KKS pipelines

1154 Views, 5 Replies
02-08-2010 12:22 AM
I am configuring AutoCAD PID with KKS codes and I have reached a problem which I cannot handle. For the equipment and valves I have set up the right coding and the corresponding annotation. When I do the same for the pipelines, the Tags do not increase in numbers. As you can see on the attached picture, I have 5 identic Tags, which should according to the database type of the program, not be possible at all.
Also when I annotate the pipelines, the same way as the valves, the annotation becomes C4GJB10BR000 instead of ........BR001 ........BR002 etc.

I even have removed the existing line Tags, and also have made the Tag and Annotation on the lowest level of the structure but it won't help.

Please help
Contributor
ronjanssen30
Posts: 21
Registered: ‎01-26-2010
Message 2 of 6 (1,154 Views)

Re: KKS pipelines

02-09-2010 10:00 AM in reply to: ronjanssen30
I have solved the problem today with someone from our support team. For pipelines, you have to use the PipelineGroupNumber out of the NonEngineering list. With this incorporated, the KKS-system can be fully integrated with AutoCAD PID. I am now busy with building all selection lists and it is gonna work really fine.
Active Member
TimGrace3759
Posts: 6
Registered: ‎02-10-2010
Message 3 of 6 (1,154 Views)

Re: KKS pipelines

02-10-2010 06:23 AM in reply to: ronjanssen30
Where can I download a guide for using the KKS numbering system?
Contributor
ronjanssen30
Posts: 21
Registered: ‎01-26-2010
Message 4 of 6 (1,154 Views)

Re: KKS pipelines

02-10-2010 07:28 AM in reply to: ronjanssen30
If you sent me an email, I will return a complete KKS-excel selection list.

ronjanssen30@hotmail.com
Active Contributor
tim.grace
Posts: 41
Registered: ‎12-06-2009
Message 5 of 6 (1,154 Views)

Re: KKS pipelines

02-10-2010 07:55 AM in reply to: ronjanssen30
will do thank you
Contributor
adelgado
Posts: 14
Registered: ‎09-22-2011
Message 6 of 6 (700 Views)

Re: KKS pipelines

08-07-2012 06:49 AM in reply to: ronjanssen30

Hi Ronjanssen30,

 

I'm introducing in KKS codes and I'm starting to set-up Autocad P&ID 2011 for KKS.

Could you send me by email your excel list?

 

Is there any way to insert this list into the Autocad P&ID database of the project?

 

Wich is the most similar tool palette for KKS european P&ID drafting? ISO, DIN, PIP, JIS....?

 

Thank you very much. 


______________________________
TERMISA ENERGIA S.A.
http:\\www.termisa.es
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD P&ID Category!

The AutoCAD P&ID forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.