Hi all, I`m working with PTC Creo Schematics (former Routed System Designer) for our P&ID’s. We're thinking to change the Software for the P&ID. I’m really surprised which improvement Autodesk made here the last years.
Here my question. Is it possible to insert a block/symbol for example a valve to the pipeline and then choosing the technical specifications from a dropdown list (database). See example selection by size of the valve.
Size | Supplier | Part number | etc. |
I already found out that I can select different sizes from a preconfigured database but I would like to select for example Size DN100 and all the rest should be filled in automatically. Is that possible without additional software programming.
Thanks a lot.
Unfortunately valves in AutoCAD P&ID are not piping specification driven. This is what would allow you to populate said data to you valve.
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions to get help installing your software.
The AutoCAD P&ID forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.
Upgrading to a 2015 product? Make sure to check these out 1st!