AutoCAD MEP Wishes

AutoCAD MEP Wishes

New Member
Posts: 1
Registered: ‎07-26-2012
Message 1 of 2 (1,382 Views)

Several very needful MEP Wishes - hidden lines, styles, psd's, schedules, etc

1382 Views, 1 Replies
07-26-2012 01:51 AM

1. Hidden lines in any viewport, even in isometric and perspective (the same as in plan view) - look at Magicad!

2. Schematic representation of mv parts by style/selection (not while creating mv part, but in drawing)

3. Hidden lines for schematic symbols

4. Saving styles in a drawing, even if representatives of styles are absent/deleted

5. Custom automatic (automatically attached)  property set definitions

6. Pipe center lines and hidden lines for sections/elevations

7. Total pipe length by style/connection size as automatic property for psd within drawing, even using multiple xrefs


These are most urgent

Posts: 18
Registered: ‎01-15-2009
Message 2 of 2 (1,243 Views)

Re: Several very needful MEP Wishes - hidden lines, styles, psd's, schedules, et

09-29-2012 10:48 AM in reply to: Alex__D

While I'm no expert on MEP, but am always trying to learn more, I believe all of these are available if you do a little bit of customizing. Check the Display Configuration to show center lines. Change the linetype to Hidden.


As for the "Custom Automatic Property Definition" ... How can autodesk POSSIBLY predict EVERYONE's Custom Property Sets, names, endless combinations, and have those all automatically attach to objects. The key word here is Custom.


AutoCAD MEP out of the box may not have these features you desire, but with some research and self-education you can easily achieve what you desire.

Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.