Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I would like to see that there is a way to create a schamatic draiwng from the plan view. like when you put in a sting of urans and water closets back to back. when you start to connect them the ask for a rise/drop and some other stuff, and if you pick rise/drop it makes a vertical pipe and makes the connection right. on the hvac when you draw a duct and have a take-off and then u don't want it anymore that it will automaticly puts it back together, same for the piping too.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")