The 3D clipping command "_3dclip" opens a small pop-up window to adjust the
clipping plane of a viewport. I use this all the time to adjust the depth of
view in a sectional view. If the drawing extents are large (as in a large
building) the pop-up window may not show the area that I am working on. The
only way I know to compensate for this is to zoom the viewport way out and
open the "_3dclip" pop-up window again. When the viewport is zoomed out this
far it is hard to accurately adjust the planes in a small pop-up window. The
ability to pan and zoom in the clipping plane pop-up window, and/or the
ability to resize the pop-up window would be helpful.
--
Pat Temporale
PFC Consulting & Design
"jason martin [Autodesk]"
wrote in message
news:8AC867B4811418DBD67ED15C0C39B1EB@in.WebX.maYIadrTaRb...
> Hi Pat -
>
> I'm probably going to sound really dumb here, but I have no idea what you
> are talking about. Would you mind trying to explain it again?
>
> jason martin
> Autodesk
>
> "Pat Temporale" wrote in message
> news:30A473397CFAEDA4180ECA4C9354C3DD@in.WebX.maYIadrTaRb...
> > How about adding the ability to pan and zoom in the clipping plane
> > adjustment pop-up. The ability to resize the pop-up would also be
> helpful.
> >
> > --
> > Pat Temporale
> > PFC Consulting & Design
> >
> >
>
>