AutoCAD MEP Wishes

AutoCAD MEP Wishes

Reply

Label Styles

43 Views, 1 Replies
10-13-2003 04:54 AM
It would be nice if the label label style could be set in the system
definitions. I realize it is more flexible to have it under preferences so
a system can use multiple label styles. Perhaps it could be set under
system definitions and under preferences it could be an override.

Re: Label Styles

10-13-2003 05:14 AM in reply to: *Andrew
Take-2

Under "Label Style Offset" is a "Clear Offset Distance" option which works
great. It would be nice to have one that worked just the opposite. An
interior distance setting between the label and the inside edges of the
duct. This would control when a label would automatically be offset out of
the duct when "Auto Adjust for 2-Line" is toggled. Right now the program
doesn't kick it out until it is touching the duct. 8" text in a 9" duct is
hard to read.

"Andrew" wrote in message
news:AB98874AC3D0EF3FDC97C007A662BDE8@in.WebX.maYIadrTaRb...
> It would be nice if the label label style could be set in the system
> definitions. I realize it is more flexible to have it under preferences
so
> a system can use multiple label styles. Perhaps it could be set under
> system definitions and under preferences it could be an override.
>
>
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post