AutoCAD MEP General Discussion

AutoCAD MEP General Discussion

Active Member
Posts: 6
Registered: ‎08-24-2008
Message 1 of 2 (408 Views)

URGENT - Hide wall under ductwork

408 Views, 1 Replies
10-04-2012 12:01 PM



I'm using MEP2013 and for some reason I cannot get my ductwork to hide the walls below. Hide meaning show haloed lines. I've tried the ootb AECB templates and it still doesn't work. The duct elevation is 15'. Base height of wall is 10' so it should display dashed lines at crossing but it doesn't. Can anyone point me in the right direction?



*Expert Elite*
Posts: 1,153
Registered: ‎03-13-2008
Message 2 of 2 (391 Views)

Re: URGENT - Hide wall under ductwork

10-05-2012 09:44 AM in reply to: shane

I believe that architectural items do not hatch underneath mvparts.  Only MEP objects will hatch under other MEP objects.  This is why alot of people will draw a slab as a mvpart so that they can get their ductwork and equipment to hatch correctly under the slab.

Keith Brown AutoCAD MEP BLOG | RSS Feed
AutoCAD MEP 2014 | Revit 2014 | EastCoast CAD/CAM V6.1 | Visual Studio 2013
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate. Thank you!
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.