AutoCAD MEP General Discussion

AutoCAD MEP General Discussion

Reply
Contributor
rdgusa
Posts: 23
Registered: ‎10-08-2003
Message 1 of 4 (137 Views)

training classes

137 Views, 3 Replies
08-06-2003 01:00 AM
I was wonderig if there will be any training classes for the new ABS4. Right now Avatech solutions don't have any listings for training. I work in DesMoines, IA. can i get a lising of class if there is any. Thanks
*[Autodesk], jason martin
Message 2 of 4 (137 Views)

Re: training classes

08-06-2003 08:21 AM in reply to: rdgusa
In the next couple of months the resellers should be receiving training on
ABS, after which they should start conducting training classes. If you can't
wait that long, or if Avatech doesn't offer anything that suites your needs
please let me know and I can put you in contact with some other trainers
that can do specialized training for your company.

jason

"rdgusa" wrote in message news:f17e9e2.-1@WebX.maYIadrTaRb...
> I was wonderig if there will be any training classes for the new ABS4.
Right now Avatech solutions don't have any listings for training. I work in
DesMoines, IA. can i get a lising of class if there is any. Thanks
Member
sbarber
Posts: 4
Registered: ‎08-14-2003
Message 3 of 4 (137 Views)

Re:

08-11-2003 08:59 AM in reply to: rdgusa
I am a trainer, and am in process of doing training for one individual at this time. The biggest problem I see is the lack of an AOTC student guide. I am using a combination of the Concept Guide and the tutorials, but find a few path definition problems in the tutorials, easy enough to work around if you do your homework. Where can I find out more about the resellers training?

Sylvia
*[Autodesk], jason martin
Message 4 of 4 (137 Views)

Re:

08-11-2003 01:27 PM in reply to: rdgusa
Hi Sylvia -

Please send me an email at jason.martin@autodesk.com and I'll get you the
information that you need.

jason

"sbarber" wrote in message
news:f17e9e2.1@WebX.maYIadrTaRb...
> I am a trainer, and am in process of doing training for one individual at
this time. The biggest problem I see is the lack of an AOTC student guide. I
am using a combination of the Concept Guide and the tutorials, but find a
few path definition problems in the tutorials, easy enough to work around if
you do your homework. Where can I find out more about the resellers
training?
> Sylvia
>
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.