I tried that first off, Jason, the ABSCadManager MNC, MNS and MNR were all
deleted leaving only the MNL and MNU files, menu unloaded from the
interface, then reloaded. No change.
Interesting. But not insurmountable. I'll just save the images from the ADT
interface and apply them as images to the toolbar buttons in the ABS
application.
Thanks.
--
Matt Dillon
Assistant Moderator: Autodesk Discussion Forums
"jason martin [Autodesk]" wrote in message
news:5D7161842532BD60699D4A35B5DEFCA7@in.WebX.maYIadrTaRb...
> Hi Matt -
>
> Have you recompiled the ABS menu's (our are named different than the
> standard ADT ones)?
>
> Please post back if it doesn't work.
>
> jason
>
> "Matt Dillon" wrote in message
> news:E219101E7D846ED45910AF98B65B47EB@in.WebX.maYIadrTaRb...
> > True, for most people, however I must be able to support both architects
> and
> > mep engineers. I need to have an ADT that is not populated by ABS, and
> vice
> > versa. Which is why I never loaded them on the same machine in 3.3 (you
> > couldn't). With 2004, it doesn't seem to be a problem, except for
possibly
> > this, which I could live with. Interesting though, since I installed ADT
> > before ABS, and it's ABS that is not finding the icons.
> >
> > --
> > Matt Dillon
> > Assistant Moderator: Autodesk Discussion Forums
> >
> >
> > "jmcfaddn" wrote in message
> > news:f1690c1.0@WebX.maYIadrTaRb...
> > Sounds like you are doubling your efforts and maybe the menus have been
> > overwritten a bit. Speaking from a BS3 stand point I am not positive on
> BS4,
> > but within BS3, a full version of ADT is included. So there was no
reason
> to
> > install a separate copy of ADT 3.3. In fact it potentially caused
problems
> > to have both loaded.
> >
> >
>
>