AutoCAD MEP General Discussion

AutoCAD MEP General Discussion

Reply
Valued Contributor
s.lawrence
Posts: 71
Registered: ‎04-18-2011
Message 1 of 2 (390 Views)

Recommended Video Cards/performance enhancing hardware

390 Views, 1 Replies
01-14-2013 12:05 PM

Hi All,

 

I'm currently working on quite a large project, and the lag has been getting slower and slower when, for example, 3D orbitting, objrelupdating, regen'ing etc. The drawing stands at about 27mb, and even by isolating the part of the drawing I'm working on doesn't give me a smooth enough workflow.

At present, I have a 64bit windows 7 operating system, IntelXeon CPU 2.4GHz, 12GB RAM and a  ATI Fire Pro V5800 graphic card (1gb).

 

I'm thinking that it's probably the graphic card which is causing the lag, does anybody have any other thoughts?

 

And if it is the graphics card, does anybody have a recommendation as to what would make my model operate more smoothly?

 

Any thoughts appreciated,

Ta

Stu

Valued Contributor
s.lawrence
Posts: 71
Registered: ‎04-18-2011
Message 2 of 2 (344 Views)

Re: Recommended Video Cards/performance enhancing hardware

01-22-2013 01:20 AM in reply to: s.lawrence

Could anybody give an example of their set-up which works well with drawings of 40-70mb then?

I had to print three drawings last night which were just one viewport with a 3D hidden style and it took around 45mins from opening, a couple of tweaks and then printing one drawing. Obviously not ideal!

 

Thanks,

Stu

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.