Community
AutoCAD MEP Forum
Welcome to Autodesk’s AutoCAD MEP Forums. Share your knowledge, ask questions, and explore popular AutoCAD MEP topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Problem autocad 2010 2012 2012 windows 8 64bit

1 REPLY 1
Reply
Message 1 of 2
cunil19
5594 Views, 1 Reply

Problem autocad 2010 2012 2012 windows 8 64bit

(need for help) For all member i wanna ask something about problem autocad 2010 2012 2013 it same at windows 8 x64

 

1. when open new documents or program the crosshair be like this.

not like 

command: SNAPANG

Enter new value for SNAPANG : 0
Command: SNAPSTYL
Enter new value for SNAPSTYL : 0

 

1.jpg

 

 

2. the mbuttonpan show auto snap setting

not line

Command: MBUTTONPAN
Enter new value for MBUTTONPAN : 1

 

 

2.jpg

 

3. the option at apperture is not show the box in the black box

 

3.jpg

 

4. the option for pickboxsize is'nt show

 

4.jpg

 

 

5. my display option 

 

5.jpg

 

6. setting for the shadow when drag cursor. is'nt appear at project desk

 

6.jpg

 

 10.jpg

 

 

 

7. spec my computers 

 

 

 7.jpg

 

8. driver computer has not got any problem

 

8.jpg

 

 

9. if i clicking left mouse cursor

 

9.jpg

 

 

 

 

the last.

if i close autocad 2010 2012 2013, and the i open it again..... it will open when i open autocad firstime...

it's mean.. the last profile is'nt save 

 

i must setting again about this 

 

Command: MBUTTONPAN
Enter new value for MBUTTONPAN <0>: 1
Command: PICKBOX
Enter new value for PICKBOX <50>: 50
Command: APBOX
Enter new value for APBOX <0>: 1
Command: SNAPANG
Enter new value for SNAPANG : 0
Command: SNAPSTYL
Enter new value for SNAPSTYL : 0

 

 

 regrads for all if you are help me 🙂

 

(sorry,,, my language is not too good)

 

 

1 REPLY 1
Message 2 of 2
DarrenP
in reply to: cunil19

windows 8 is not a supported OS

look here for windows 8 issues: http://forums.autodesk.com/t5/forums/searchpage/tab/message?q=windows+8

DarrenP
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.

EESignature

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost