AutoCAD MEP General Discussion

AutoCAD MEP General Discussion

Reply
Valued Contributor
AddisCAD
Posts: 66
Registered: ‎01-03-2008
Message 11 of 16 (1,902 Views)

Re: NavisWorks tutorial ???(video or image supported)

07-31-2008 07:51 AM in reply to: AddisCAD
Okay, I got you.
Thank you very much
New Member
john-e
Posts: 1
Registered: ‎12-14-2008
Message 12 of 16 (1,902 Views)

Re: NavisWorks tutorial ???(video or image supported)

12-14-2008 03:52 PM in reply to: AddisCAD
Here is a good link for a simple how-to NavisWorks tutorial

http://www.et.byu.edu/groups/cmfac/miller/cm510/notes/Navisworks/NavisworksTutorial.html
Contributor
david.kingham
Posts: 16
Registered: ‎07-12-2004
Message 13 of 16 (1,902 Views)

Re: NavisWorks tutorial ???(video or image supported)

12-17-2008 06:43 PM in reply to: AddisCAD
You can find a lot of help on the [AUGI NavisWorks Forum|http://discussion.autodesk.com/forums/thread.jspa?messageID=6089738&tstart=0#6089738]

The help file is very in depth, there are good tutorials on [Autodesk Subscription|http://www.autodesk.com/subscriptionlogin] if you subscribe.

You can also find good classes at [AU Online|http://au.autodesk.com/?extrafield=ms_description&allwords=1&nd=m_asearch&akeywords=navisworks]
New Member
tacardon
Posts: 1
Registered: ‎01-10-2009
Message 14 of 16 (1,903 Views)

Re: NavisWorks tutorial ???(video or image supported)

01-10-2009 10:35 AM in reply to: AddisCAD
How do you ensure that the insertion point is the same on the files? I am trying to insert a file from Revit Architecture and Revit Structure but I can not seem to get them lined up without a lot of work. All of the tutorials and such I find they seem to just line up as they bring them in.

Taylor Cardon
Member
michaelnsmith86
Posts: 3
Registered: ‎04-23-2011
Message 15 of 16 (788 Views)

Re: NavisWorks tutorial ???(video or image supported)

03-09-2012 12:09 AM in reply to: AddisCAD

To ensure your models are aligned I highly suggest seeing the BYU tutorial.  http://cmfac.groups.et.byu.net/miller/cm411/help/navisworks/Navis11.php  Granted, I am biased as I wrote the tutorial when I was still going to school there, but it still holds true.  If you have additional questions feel free to contact me.  michaelnsmith86@gmail.com In general, the best way is to ensure your origins truely are in the same location.  Revit origins are actually arbitrary where they are formed initially.  If you are using a normal CAD system, ensure your ucs is set to the Revit origin.

Distinguished Contributor
jeromecastaneda
Posts: 198
Registered: ‎07-27-2004
Message 16 of 16 (751 Views)

Re: NavisWorks tutorial ???(video or image supported)

03-20-2012 07:46 PM in reply to: AddisCAD

please check out some of the tutorials that I compiled.

 

Quick start tutorial on Navisworks http://bit.ly/wjv8ZQ

 

Clash Detective http://bit.ly/wsXkHG

 

Navisworks Tutorials - 4D Timeliner http://bit.ly/GGvhhM

 

cheers,

 

Jerome

http://engr.jeromecastaneda.com/
“What we do for ourselves dies with us. What we do for others and the world remains and is immortal.” - Albert Pine
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.