AutoCAD MEP General Discussion

AutoCAD MEP General Discussion

Reply
Member
mustangman5058
Posts: 4
Registered: ‎05-15-2013
Message 1 of 4 (289 Views)

Lost properties pallette

289 Views, 3 Replies
05-17-2013 08:59 AM

I opened MEP 2012 this morning to realize that my properties pallette had magically disappeared overnight, and I cannot, for the life of me, find it anywhere. I have minimized my screens, undocked the other pallettes, xrefs, and layer manager, and it is nowhere to be found. When I click on the tools drop down, and click on properties, it comes on in the command prompt, but nothing comes up. When I click it again, it says properties closed, which tells me it is open somewhere. I am stumped. Any help is very much appreciated. 

*Expert Elite*
Keith.Brown
Posts: 1,192
Registered: ‎03-13-2008
Message 2 of 4 (276 Views)

Re: Lost properties pallette

05-18-2013 06:08 AM in reply to: mustangman5058

Try switching your profile and see if it shows up.  Then switch back to your original profile.  This is a trick that i use that works about 80% of the time.


Keith Brown AutoCAD MEP BLOG | RSS Feed
AutoCAD MEP 2014 | Revit 2014 | EastCoast CAD/CAM V6.1 | Visual Studio 2013
────────────────────────────────────
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate. Thank you!
Active Contributor
mdsonline
Posts: 32
Registered: ‎01-04-2006
Message 3 of 4 (266 Views)

Re: Lost properties pallette

05-19-2013 02:02 AM in reply to: mustangman5058
why not just try switching your workspace?
Valued Mentor
mdhutchinson
Posts: 2,317
Registered: ‎11-18-2003
Message 4 of 4 (256 Views)

Re: Lost properties pallette

05-19-2013 02:41 PM in reply to: mdsonline

open cui editor find the prop pallete and edit the properties to have it dock to one side or the other.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.