Community
AutoCAD MEP Forum
Welcome to Autodesk’s AutoCAD MEP Forums. Share your knowledge, ask questions, and explore popular AutoCAD MEP topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Label curve Display

2 REPLIES 2
Reply
Message 1 of 3
alatier
906 Views, 2 Replies

Label curve Display

I cant seem to fid a way for the label curves to display in the same orientation

It seems to depend on the way the pipe was drawn

I tried to reverse the flow with no luck

I dont want to have to redraw the pipe especially where I have a lot of takeoffs

I can make a work around adding a pipe section, but there must be a better way

screenshot attached

Cheers

Pete

 

2 REPLIES 2
Message 2 of 3
Keith.Brown
in reply to: alatier

Can you share a small simple drawing?  It is difficult for me to determine what is going on from an image alone. 

Message 3 of 3
Pothman
in reply to: Keith.Brown

I agree with Keith, a sample drawing would be very helpful. I can't reproduce this issue. Here is a video showing pipe labels. They come in Right Reading regardless of how the pipes are drawn. You can adjust the style to have all labels be forced to horizontal but I'm not sure how the labels would flip. A sample drawing would be very helpful in figuring out this issue.

 

http://autode.sk/1M6EdeZ

 

BTW - if you want the try the utility that I used to create the video, you can download it for free here: www.autodesk.com/screencast

 



Dave Pothier

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost