AutoCAD MEP General Discussion

AutoCAD MEP General Discussion

Reply
New Member
Kushagram
Posts: 1
Registered: ‎06-14-2012
Message 1 of 2 (1,137 Views)

Importing CADDuct and CADPipe Models in Revit via AutoCAD MEP

1137 Views, 1 Replies
06-18-2012 03:36 PM

I am trying to import CADDuct and CADPipe Models in Revit. I do not have license for either CADDuct or CADPipe.  So the way I am doing this is by opening the DWG files in AutoCAD MEP and exporting them as IFC's and at last importing (opening) IFC file in Revit.

 

By this method most of the geometry comes through but there is no intelligence to the model. The duct in Revit is just a Generic Model and there are no properties associated with the duct. I have tried other ways of bringing the CAD data into Revit but in all the cases I have been able to get the geometry but no associated data comes along.

 

I really need help in resolving this issue.

 

Thank you.

Kushagra

Board Manager
Nicholas.Hyland
Posts: 28
Registered: ‎11-01-2011
Message 2 of 2 (1,079 Views)

Re: Importing CADDuct and CADPipe Models in Revit via AutoCAD MEP

06-25-2012 08:23 AM in reply to: Kushagram

Hi Kushagram,

The only way to access the CADmep properties generically (without purchasing the application) would be to use the MapsComW which is installed with the Fabrication CADmep 2013 object enabler.

You may then be able to get the properties to appear in the IFC output (for validation it may be an idea to contact the AutoCAD MEP team to see if they do extract the CADmep properties from the enabler).

If these properties do not appear in Revit (but do appear in other IFC viewers) then that issue would be best raised with the Revit support team. I would suggest submitting through the Contact Us > Feedback > Products (product features and improvements you would like to see) link at the top of this page.

I hope this helps.

Nick



Nicholas Hyland
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.

Announcements
Are You Going To Be @ AU 2014? Feel free to drop by our AU topic post and share your plans, plug a class that you're teaching, or simply check out who else from the community might be in attendance. Ohh and don't forgot to stop by the Autodesk Help | Learn | Collaborate booths in the Exhibit Hall and meet our community team if you get a chance!