AutoCAD MEP General Discussion

AutoCAD MEP General Discussion

Reply
Active Member
Bil_at_C3
Posts: 6
Registered: ‎11-05-2003
Message 1 of 3 (83 Views)

Flex Duct Crash?

83 Views, 2 Replies
09-24-2003 05:12 AM
I've got a drawing in which I am adding some flex duct and it crashes ABS. Here's the error we get: Internal Error
!dbobji.cpp@258. I'll be looking through the existing posts for answers but please feel free to throw some suggestions my way. bsilliker@c3boston.com
*Liang, Qi
Message 2 of 3 (83 Views)

Re: Flex Duct Crash?

09-25-2003 10:29 PM in reply to: Bil_at_C3
What kind of the type of the flex duct (line, arc or spline) you used when
the crash occurred?
Is there any other BS object in the drawing?

Thanks.

Qi Liang

"Bil_at_C3" wrote in message
news:f18d317.-1@WebX.maYIadrTaRb...
I've got a drawing in which I am adding some flex duct and it crashes ABS.
Here's the error we get: Internal Error
!dbobji.cpp@258. I'll be looking through the existing posts for answers but
please feel free to throw some suggestions my way. bsilliker@c3boston.com
Active Member
Bil_at_C3
Posts: 6
Registered: ‎11-05-2003
Message 3 of 3 (83 Views)

Re:

09-30-2003 12:50 AM in reply to: Bil_at_C3
flex duct was vertical pattern 2.

there were other abs objects.

what we did to fix the problem was to use that old autocad quick fix to a problem that you can't make any sense out of... we wblocked the entire drawings contents into a new file and opened that file and the command worked as expected.

also... I should mention that it was actually in abs3 not 2004... sorry for using wrong forum.
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.