Duct Transitions - Part II

[Buster1379]

Still need some help on creating a variable length duct transition. I downloaded the file as directed previously, but when I create a new transition (test transition) as described in the video and select OK it kicks me out of the content builder and the new transition part is not created. Also if I try to modify one of the existing transitions it also kick me out of the content builder.
Please Help
Tom

[Anonymous]

Hi Tom -

Could you help me out with when exactly content builder is kicking you out?

jason martin
Autodesk

"Buster1379" wrote in message
news:f13d7b4.-1@WebX.maYIadrTaRb...
> Still need some help on creating a variable length duct transition. I
downloaded the file as directed previously, but when I create a new
transition (test transition) as described in the video and select OK it
kicks me out of the content builder and the new transition part is not
created. Also if I try to modify one of the existing transitions it also
kick me out of the content builder.
> Please Help
> Tom

[Buster1379]

Jason,
When I click new Parametric Part it Prompts me for a part name and description and then I click OK, Next thing I know I am at the command prompt. Although I briefly see the content builder dialog box, when I would go back into the content builder my part is gone. Also if I go to modify and existing part, as soon as I click modify parametric part I go back to the command line.
Tom

[Anonymous]

Hmmm, that sounds bad...

It sounds like you may have some kind of installation issue. Let me dig
around for a bit and see if I can make anything like that happen, or find
someone who might know why something like that would happen.

jason

"Buster1379" wrote in message
news:f13d7b4.1@WebX.maYIadrTaRb...
> Jason,
> When I click new Parametric Part it Prompts me for a part name and
description and then I click OK, Next thing I know I am at the command
prompt. Although I briefly see the content builder dialog box, when I would
go back into the content builder my part is gone. Also if I go to modify and
existing part, as soon as I click modify parametric part I go back to the
command line.
> Tom

[Anonymous]

Hi Tom -

I sent an email to the address you have listed here with some questions. Is
there another way of contacting you "off-line"?

jason

"Buster1379" wrote in message
news:f13d7b4.1@WebX.maYIadrTaRb...
> Jason,
> When I click new Parametric Part it Prompts me for a part name and
description and then I click OK, Next thing I know I am at the command
prompt. Although I briefly see the content builder dialog box, when I would
go back into the content builder my part is gone. Also if I go to modify and
existing part, as soon as I click modify parametric part I go back to the
command line.
> Tom

[Buster1379]

Jason,
My correct E-mail address is as follows:
tarmbruster@aegroup.org
My phone at work is 570-822-8500
no extension just ask for me
Tom Armbruster

[Anonymous]

As a note to all:

If you are going to try and use content builder, be sure the SDI variable is
set to 0. The parametric portion of content builder needs to create a new
drawing to work correctly, so it will not work if SDI is set to 1.

jason martin
Autodesk

"Buster1379" wrote in message
news:f13d7b4.-1@WebX.maYIadrTaRb...
> Still need some help on creating a variable length duct transition. I
downloaded the file as directed previously, but when I create a new
transition (test transition) as described in the video and select OK it
kicks me out of the content builder and the new transition part is not
created. Also if I try to modify one of the existing transitions it also
kick me out of the content builder.
> Please Help
> Tom