AutoCAD MEP General Discussion

AutoCAD MEP General Discussion

Posts: 5
Registered: ‎11-01-2007
Message 1 of 3 (611 Views)
Accepted Solution

custom tag

611 Views, 2 Replies
11-08-2012 02:40 PM

I had my new diffuser tag all worked out. Exploded an air terminal device tag, moved things around, change text styles, changed layers from 0 to G-anno-std-text-tag .  I did the definetag command and when I select the insert point, the tag goes to about 1/10 of it's size.

Is there a variable that I accidently turned on that is rescaling the tag as it is beign created?

*Expert Elite*
Posts: 1,127
Registered: ‎03-13-2008
Message 2 of 3 (610 Views)

Re: custom tag

11-08-2012 02:43 PM in reply to: TheH

Before you redefine the tag, you need to make sure that your annotation scale is set to 1:1 and that your text is non annotative and set to 1" tall.  This will make it appear correctly once you create a tag.

Keith Brown AutoCAD MEP BLOG | RSS Feed
AutoCAD MEP 2014 | Revit 2014 | EastCoast CAD/CAM V6.1 | Visual Studio 2013
⁞|⁞ Please use Mark Solutions!.Accept as Solution and Give Kudos!Give Kudos as appropriate. Thank you!
Posts: 5
Registered: ‎11-01-2007
Message 3 of 3 (568 Views)

Re: custom tag

11-12-2012 01:46 PM in reply to: Keith.Brown

Thanks. That was the problem.

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions to get help installing your software.

New AutoCAD MEP Category!

The AutoCAD MEP forum has moved into it's very own category page, and can no longer be found within the Additional Product Forums.