2 LINE DUCT AND PIPE DROPS AND RISES

[Anonymous]

Problem 1: Pipe rises, when shown in sigle line, use the drop symbol.

Problem 2: Also, rectangular duct rises are showing up as drops with a broken line instead of solid.

Is this the same problem? Why aren't the rise symbols showing up. The rise symbols exist in the drawing and are correct. The program doesn't seem to be using the blocks specified in style manager.

Thank you anyone???
Mary Ellen

[Anonymous]

Hi Mary Ellen -

Rise/Drop is being set by flow direction in the
duct.  By default, the flow is bi-directional and only one symbol is
shown.  Try setting the flow which should enable your rise/drops to come in
properly.

I hope this helps!

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

"MARYELLEN" <
href="mailto:mary_ellen_banning@urs">mary_ellen_banning@urs corp.com>
wrote in message
href="news:f18a517.-1@WebX.maYIadrTaRb">news:f18a517.-1@WebX.maYIadrTaRb...

Problem
1: Pipe rises, when shown in sigle line, use the drop symbol.

Problem 2: Also, rectangular duct rises are showing up as drops with a
broken line instead of solid.

Is this the same problem? Why aren't the rise symbols showing up. The rise
symbols exist in the drawing and are correct. The program doesn't seem to be
using the blocks specified in style manager.

Thank you anyone???
Mary Ellen