Design line

[narwal_jaat]

Radius Bend
Geometry & sizes appeared to match but failed final placement test
Failed to get a bend for angle 6.7 Width = 1600.0, Depth = 1100.0 - Node : 2 (x-8177.27 y22879.31 z20000.00)
Radius Bend
Geometry & sizes appeared to match but failed final placement test
Failed to get a bend for angle 6.7 Width = 1600.0, Depth = 1100.0 - Node : 2 (x-8177.27 y22879.31 z20000.00)
Radius Bend
Geometry & sizes appeared to match but failed final placement test
Failed to get a bend for angle 6.7 Width = 1600.0, Depth = 1100.0 - Node : 2 (x-8177.27 y22879.31 z20000.00)

i found that problem after troubleshooting can anyone help me to solve it 

thanks