AutoCAD Mechanical General Discussion

AutoCAD Mechanical General Discussion

Reply
New Member
2 Posts
0 Kudos
Registered: ‎04-19-2012
Post 1 of 3

Using Ortho (F8) issue

207 Views, 2 Replies
04-19-2012 11:42 AM

I have a problem with only one drawing settings about using Ortho (F8) command when drawing or rotating geometry.

When I select F8 (locking ortho for x & y direction), it let's me move curser in inly "Y" axis. It doesallow me move in "x" axis.

I do not know were to go to correct this settings. Help guide does not have it.

 

Please help me and thank you very much.

Employee
483 Posts
25 Kudos
Registered: ‎07-11-2008
Post 2 of 3

Re: Using Ortho (F8) issue

04-19-2012 07:49 PM in reply to: igorlalic2012

Hi,

 

Can you be more specific about your issue? Are you saying you cannot move your cursor horizontally but only vertically? Does it happen to new drawing or some specific drawing?

Thanks.
Michael Su
SQA Engineer
Autodesk
------------------------------------------------------------------------------------------------------
Please mark any response as "Accept as Solution" if it answers your question.

New Member
2 Posts
0 Kudos
Registered: ‎04-19-2012
Post 3 of 3

Re: Using Ortho (F8) issue

04-20-2012 04:37 AM in reply to: michaelsu

I solved my own issue. I found out that drawing was in wrong view and nothing was working in "x" direction.

I changed view and everything was working fine. Sorry for emberresing myself, but at least I am happy problem is corrected.

 

Thank you for respond.

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Are you interested in helping shape the future of the Autodesk Community? To participate in this brief usability study, please click here. Your time and input is greatly appreciated!