Power Dimensioning Dimensions Disapear after Placing them

[kesseltine]

I have just a single Mechanical File that the pwer dimenisioning soenst seem to work, this file is a file that was imported from another CAD program and when I pull the File up in AutoCAD the dimensions work just fine I have attached a Video of what it is doing that should help explain the issue.

[Yong.Jing]

If this does not solve this issue, does it happen to only this drawing or all drawing? 

If only this drawing, could you check the standard used in this dwg from Options> AM:Standards. I suspect yours might be blank or wrong. 

If all the drawing, could reset settings to default to repair the software, then check issue solved. 

[kesseltine]

It is just this Drawing that is doing it , when I start a brand new drawing and do the power dimensioning it works just fine , I changed the one drawing over to standard and still the same result , it doesn't show. I am going to keep playing around with the styles and see if I can find the issue with one of the styles thank you for your help.


Kurt Esseltine
CAD Application Specialist
903 S Main Street
Middlebury IN 46540

1-574-825-5861 x 2291

[Yong.Jing]

Could you send me the drawing with issue? Let us check what issue it has. 

[kesseltine]

attached


Kurt Esseltine
CAD Application Specialist
903 S Main Street
Middlebury IN 46540

1-574-825-5861 x 2291

[Yong.Jing]

I have not seen the attachment in this thread or email or the case escalate to subscription center. . Could you confirm it?

[kesseltine]

I can't attach the drawing it is too large to go through our mail system , do you have a ftp site or autocad360 site I can upload it to ?


Kurt Esseltine
CAD Application Specialist
903 S Main Street
Middlebury IN 46540

1-574-825-5861 x 2291

[Yong.Jing · Accepted solution]

The workaround for this issue is to copy and paste all drawing into a new file.