I guess I don't mean that it would be "no problem", I just mean I can add new items to our attribute blocks and add the text to it as I go along. I have hundreds of tracts like this that I am mapping in this area, maybe closer to a thousand and we don't normally add xdata to the polylines, but are going to for this particular file. I will update the attribute block and upload that file shortly, but please don't stay on my account. It might be just a bit before I can get that done. If you would like to look at this tomorrow or the next time you have a chance, that would be great!
>> It might be just a bit before I can get that done. If you would like to look at this tomorrow or the next time
ok, then I wait
- alfred -
sorry, a day with just phone and no pause
Well, I have attached a DLL that should do what you need. Be careful, I have not tested that to much, so it's necessary to do verifications that you know that everything is running as you like and need it!
To load the app: start AutoCAD, start command _NETLOAD ==> show this DLL (please store it locally on your harddisk as the NETLOAD-command will not load DLL's from a network-path, at least as long as there are no special security settings).
When it's loaded you have a command ANTools_ShowForm_XD added to AtuoCAD, start it to get the form with three functions you need (and a very little description below if these 3 buttons).
I did a video to show how to load and how to use it, I can send it via email to you (it's 6MB and so I can't upload it here). If you want to have this video mailed send me a PM (you have the option within this forum) and give me the mail-adress you want to have it sent to.
Good luck, - alfred -
PS: let me know if everything does not work as you like .... let me also know if it's working as you like
This is a wonderful thing! This is exactly what I was looking for.
The only thing that doesn't work for me for some reason is the close button and that is not a big deal. I can exit out by hitting the x button at the top just the same.
I really appreciate this!!!
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.
Upgrading to a 2015 product? Make sure to check these out 1st!