AutoCAD Map 3D General Discussion

AutoCAD Map 3D General Discussion

Reply
New Member
14078610659
Posts: 1
Registered: ‎08-16-2012
Message 1 of 4 (555 Views)
Accepted Solution

Text information from shp file to dwg

555 Views, 3 Replies
08-16-2012 02:17 AM

Hi. I have a problem importing text information from shp file to dwg. Using a command “Add to Map” I can see that shape file consists of Map Feature(s) objects and under Feature Properties there is an information that I need to move to Autocad environment (IGDS_TXT_;TEXTSTRING; TEXT_ANGLE). I’ve tried “mapimport” command  but in result I’ve got only acad point objects with no information in it. Thx

after you add the shp, display manager, select the shp; style; feature labels

Hi,

 

as mentioned above, you can label the FDO features in Display Manager or you when you  import the attribute data it can be used for labelling as well (Map annotation or using DisplayManager again for annoation of drawing objects).

 

But there is a third option. The column names indicate that the SHP files might have been created with Map, using the export option "Text" (_mapexport > Shape > Text). But you can also import point featues eitehr as block or text. Here ist the procedure for importing as ACAD text:

 

1 mapimport > SHP file

2 click on <ACAD_POINT> in the "Points" column

3 a small button with three dots appears on the right

4 click on it

5 dialog box "How to process points" or something along the lines appears

6 choose second option, "create text from attribute data " and select "Textstring" column

 

Unfortunately it will ignore Text_angle and text_size or any other format setting. But depending on your data it might be a usefull option for importing.

 

Good luck,

Rob

*Expert Elite*
antoniovinci
Posts: 1,700
Registered: ‎06-03-2011
Message 2 of 4 (552 Views)

Re: Text information from shp file to dwg

08-16-2012 02:40 AM in reply to: 14078610659

During _MAPIMPORT, pay attention to this, sir.

Valued Mentor
parkr4st
Posts: 454
Registered: ‎03-24-2004
Message 3 of 4 (547 Views)

Re: Text information from shp file to dwg

08-16-2012 02:45 AM in reply to: antoniovinci

after you add the shp, display manager, select the shp; style; feature labels

Mentor
Robert_Fritz
Posts: 171
Registered: ‎12-08-2011
Message 4 of 4 (537 Views)

Re: Text information from shp file to dwg

08-16-2012 05:00 AM in reply to: 14078610659

Hi,

 

as mentioned above, you can label the FDO features in Display Manager or you when you  import the attribute data it can be used for labelling as well (Map annotation or using DisplayManager again for annoation of drawing objects).

 

But there is a third option. The column names indicate that the SHP files might have been created with Map, using the export option "Text" (_mapexport > Shape > Text). But you can also import point featues eitehr as block or text. Here ist the procedure for importing as ACAD text:

 

1 mapimport > SHP file

2 click on <ACAD_POINT> in the "Points" column

3 a small button with three dots appears on the right

4 click on it

5 dialog box "How to process points" or something along the lines appears

6 choose second option, "create text from attribute data " and select "Textstring" column

 

Unfortunately it will ignore Text_angle and text_size or any other format setting. But depending on your data it might be a usefull option for importing.

 

Good luck,

Rob

http://raumpatrouille3d.blogspot.ch/
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.