AutoCAD Map 3D General Discussion

AutoCAD Map 3D General Discussion

Reply
Contributor
hallgrimur
Posts: 23
Registered: ‎03-27-2013
Message 1 of 6 (473 Views)

SSA - Storm and Sanitary Analysis - import from industry model

473 Views, 5 Replies
08-12-2013 07:41 AM

Hi

 

Anyone using Storm and Sanitary Analysis from a wastewater industry model?  I have been looking into that  but have run into a problem regarding units (using metric units).  When importing data from wastewater industry model into SSA it assumes that pipe dimensions are given in meters and subbasins area are given in ha.  My data is in mm and sqr.m.  

 

Can I define what units to use when importing this data??

 

If I import GIS data (shp files) I can define what units the data is in.

 

Using 2013 versions of Map and SSA.

 

with regards

Hallgrímur

Product Support
Matt_Haokip
Posts: 102
Registered: ‎05-27-2011
Message 2 of 6 (442 Views)

Re: SSA - Storm and Sanitary Analysis - import from industry model

08-13-2013 08:39 AM in reply to: hallgrimur

Hi,

 

Can you go to Input | Project Options and make sure that the Unit System is US Units and then import the data? If the issue still persists, please attach the data.

 

Thanks,

If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!



Matt Haokip
Contributor
hallgrimur
Posts: 23
Registered: ‎03-27-2013
Message 3 of 6 (437 Views)

Re: SSA - Storm and Sanitary Analysis - import from industry model

08-13-2013 09:49 AM in reply to: Matt_Haokip

Hi

 

Thanx for the reply.

 

It does not matter if I change the units in Project Options.  No matter what the values are there by default.  It seems that when exporting from Map to SSA it changes these values automatically no matter what they were before.

 

 

SSA.jpg

 

Not able to attach my dwg file becouse of file size limit.

 

 

with regards.

Hallgrimur

Product Support
Matt_Haokip
Posts: 102
Registered: ‎05-27-2011
Message 4 of 6 (433 Views)

Re: SSA - Storm and Sanitary Analysis - import from industry model

08-13-2013 09:53 AM in reply to: hallgrimur

Hi, 

 

Please open a support request so that you can upload the files and we can research into the issue further.

 

Thanks,

If my post answers your question, please mark it as an Accepted Solution, so that others can find answers quickly!



Matt Haokip
Contributor
hallgrimur
Posts: 23
Registered: ‎03-27-2013
Message 5 of 6 (422 Views)

Re: SSA - Storm and Sanitary Analysis - import from industry model

08-14-2013 07:05 AM in reply to: Matt_Haokip

Hi

 

Managed to trim the file down. 

 

with regards

Hallgrimur

Contributor
hallgrimur
Posts: 23
Registered: ‎03-27-2013
Message 6 of 6 (410 Views)

Re: SSA - Storm and Sanitary Analysis - import from industry model

08-15-2013 06:42 AM in reply to: hallgrimur

Another thing that I did notice is that the pipe length value in not coming through either.

 

15-8-2013 13-41-13.jpg

 

with regards.

Hallgrimur

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Announcements
Do you have 60 seconds to spare? The Autodesk Community Team is revamping our site ranking system and we want your feedback! Please click here to launch the 5 question survey. As always your input is greatly appreciated.