AutoCAD Map 3D General Discussion

AutoCAD Map 3D General Discussion

Reply
Active Contributor
iam_doss
Posts: 30
Registered: ‎10-28-2007
Message 1 of 7 (418 Views)
Accepted Solution

No way to display new tooltips and hyperlinks in AutoCAD Map 2013..

418 Views, 6 Replies
06-15-2012 03:57 AM

Hi, really works for someone?

 

I have tried all tricks that I know but nothing happens. Is there some system or environment variable involved? (I have ROLLOVERTIPS=1)

 

Windows 7 Professional 64 bits

AutoCAD Map 3D 2013 Spanish

OK Phil, ROLLOVERTIPS=1 and SELECTIONPREVIEW=1 and that works. I have always SELECTIONPREVIEW=2, that is more comfortable for me

 

Thanks

Product Support
phil_borycens
Posts: 196
Registered: ‎10-25-2011
Message 2 of 7 (384 Views)

Re: No way to display new tooltips and hyperlinks in AutoCAD Map 2013..

06-18-2012 04:28 PM in reply to: iam_doss

ROLLOVERTIPS is important, but you might want to try a different value for SELECTIONPREVIEW too. Please let me know if this helps...

 

Thanks!

Phil



Phil Borycens
Active Contributor
iam_doss
Posts: 30
Registered: ‎10-28-2007
Message 3 of 7 (377 Views)

Re: No way to display new tooltips and hyperlinks in AutoCAD Map 2013..

06-19-2012 01:04 AM in reply to: iam_doss

OK Phil, ROLLOVERTIPS=1 and SELECTIONPREVIEW=1 and that works. I have always SELECTIONPREVIEW=2, that is more comfortable for me

 

Thanks

Active Contributor
iam_doss
Posts: 30
Registered: ‎10-28-2007
Message 4 of 7 (361 Views)

Re: No way to display new tooltips and hyperlinks in AutoCAD Map 2013..

06-20-2012 03:34 AM in reply to: iam_doss

Edition: SELECTIONPREVIEW may be 1 or 3, but not 0 or 2

Member
ME140988
Posts: 4
Registered: ‎07-01-2005
Message 5 of 7 (243 Views)

Re: No way to display new tooltips and hyperlinks in AutoCAD Map 2013..

03-22-2013 01:14 AM in reply to: iam_doss

Where can I find these variables ROLLOVERTIPS and SELECTIONPREVIEW so I can change it. Thank you

*Expert Elite*
antoniovinci
Posts: 1,701
Registered: ‎06-03-2011
Message 6 of 7 (236 Views)

Re: No way to display new tooltips and hyperlinks in AutoCAD Map 2013..

03-22-2013 02:26 AM in reply to: ME140988

Click CTRL-9 to show the command line (if you haven't one) then type those commands, sir.

*Expert Elite*
braudpat
Posts: 2,277
Registered: ‎12-15-2006
Message 7 of 7 (233 Views)

Re: No way to display new tooltips and hyperlinks in AutoCAD Map 2013..

03-22-2013 02:53 AM in reply to: antoniovinci

 

Hello

 

If I remember right ...

 

SELECTIONPREVIEW = 3 is mandatory for Tooltips (MAP 2013)

 

Bye, Pat

 

 

 

Bye, Pat ( Supporting Troops )
If you are happy with my answer please mark "Accept as Solution" and if very happy please give me a Kudos (Compliment) - Thanks
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.