AutoCAD Map 3D General Discussion

AutoCAD Map 3D General Discussion

Reply
Member
CCGIS_2011
Posts: 4
Registered: ‎07-08-2013
Message 1 of 3 (123 Views)

MAPEXPORT QUESTION ___text and arcs not to scale___

123 Views, 2 Replies
07-09-2013 02:27 PM

Using AutoCAD Map 3D 2012 Im exporting a few subdivisions to MapInfo after doing my steps on a MAPEXPORT command to create a .TAB or .MIF / .MID which are the steps do below.

 

 

MAPEXPORT --> select format_ .TAB or .MIF ---> select my drawing manually  ----> do my coordinate conversion -----> DONE..

 

 

When in MAPINFO and ready to open / import the exported .TAB it opens and places the drawings (subdivisions) in its correct coordinate I gave it, but the TEXT and ARC / CIRCLES do not come in to scale at all they are extremely large to a point where they can't be seen till I do a zoom all...

 

How can I fix this ....

*Expert Elite*
antoniovinci
Posts: 1,681
Registered: ‎06-03-2011
Message 2 of 3 (108 Views)

Re: MAPEXPORT QUESTION ___text and arcs not to scale___

07-09-2013 11:58 PM in reply to: CCGIS_2011

Ain't Mapinfo to test your issue, but I fear there's no chance to fix it, sir.

As a workaround, before _MAPEXPORTing, try to convert arc/circles to polylines, thru this tool.

Member
CCGIS_2011
Posts: 4
Registered: ‎07-08-2013
Message 3 of 3 (86 Views)

Re: MAPEXPORT QUESTION ___text and arcs not to scale___

07-10-2013 07:21 AM in reply to: antoniovinci
I converted the arcs / circles to polylines and it worked when imported to mapinfo. The text on the othe hand still way off scale.

Thanks for the tip!
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.