AutoCAD Map 3D General Discussion

AutoCAD Map 3D General Discussion

Reply
Active Contributor
mekohler
Posts: 33
Registered: ‎01-18-2010
Message 1 of 12 (475 Views)

Map Crashes with DWG

475 Views, 11 Replies
08-14-2012 12:59 PM

Hi, I'm using Map 2013, I have Windows 7 and I am using th 64 bit version of Map.  I have a dwg with 3 mpolygons, so the drwaing size is very small.  But whenever I try to open this drawing I get the Fatal Error: Unhandled Access Violation Reading 0x0030 Exception at  d446952ch.  I have attached the drawing if anybody wants to take a look.

Thank you,

Michael Kohelr

*Expert Elite*
Alfred.NESWADBA
Posts: 8,982
Registered: ‎06-29-2007
Message 2 of 12 (473 Views)

Re: Map Crashes with DWG

08-14-2012 01:21 PM in reply to: mekohler

Hi,

 

I have not had any problem opening your dwg. I did a _AUDIT ==> no errors.

I saved it with a new name and attached it here, can you open now what I saved?

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Active Contributor
mekohler
Posts: 33
Registered: ‎01-18-2010
Message 3 of 12 (471 Views)

Re: Map Crashes with DWG

08-14-2012 01:32 PM in reply to: Alfred.NESWADBA

No, I get the same error.  I've been reading that mpolygons are causing crashes on 64 bit machines.  I'm going to install 2010 32 bit and see if it still works.  All I'm doing is getting rid of donuts in a drawing containing closed polygons.  Instead of creating a topology and subtracting the polygons, I have a seperate drawing with the closed polygons.  I then delete and copy and paste the correct polygons from this drawing.  I have to do this once a month.

But thanks for the effort.

Michael Kohler

*Expert Elite*
Alfred.NESWADBA
Posts: 8,982
Registered: ‎06-29-2007
Message 4 of 12 (469 Views)

Re: Map Crashes with DWG

08-14-2012 01:37 PM in reply to: mekohler

Hi,

 

>> I've been reading that mpolygons are causing crashes on 64 bit machines

I read and wrote your file with Map3D2013/64bit German on Win7/64bit Enterprise (SP1+updates up to now installed).

 

I have admin-rights, maybe that can be a help for you.

You may also try to create a new user-account with admin-rights on your worstation and try Map3D then again.

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
*Expert Elite*
LisaPohlmeyer
Posts: 563
Registered: ‎01-14-2009
Message 5 of 12 (463 Views)

Re: Map Crashes with DWG

08-14-2012 02:02 PM in reply to: mekohler

I'm using Win 7-64 and Civil 3D 64bit, I can open your drawing fine.  Perhaps repairing your install?  Or as Alfred suggested, running as Administrator.

Lisa Pohlmeyer

C3D 2012 SP4, C3D 2015
Please use "Accept as Solution" if this solved your issue.
Active Contributor
mekohler
Posts: 33
Registered: ‎01-18-2010
Message 6 of 12 (439 Views)

Re: Map Crashes with DWG

08-15-2012 10:08 AM in reply to: LisaPohlmeyer

There's something about mpolygons that crashes map for me.  I've done a reinstall and have followed the advice in a few other threads, i.e. I've turned off the properties dialogue box.  It's not just the dwg file I've attached.  I've created a simple polgon topolgogy, with 3 polygons, and I as soon as I convert topology to mpolgyons Map crashes.

I have to convert a shapefile to a sdf 2 to publish in Map Guide 6.5.  The reason I use mpolygons is to get rid of some internal islands.  Is there another way of doing this?  I've used a FDO connection to connect to the shapefile, but I can't export it.

Michael Kohler

Valued Contributor
ishkav
Posts: 61
Registered: ‎11-15-2007
Message 7 of 12 (317 Views)

Re: Map Crashes with DWG

10-23-2012 09:24 PM in reply to: mekohler

I have the same issue with Civil 3D 2013. I run it on my laptop and the issue is simple. I draw a rectangle, I try to create a polygon using MPolygon and it creates it. When I exit the command and I try to hover over the polygon, the cursor stops at the edge of the polygon and fatal errors. What graphics card do you use? I run a switchable based on Intel and AMD. 

Ishka
CAD Manager
Tom Groll Engineering
Email: ishka@tg-eng.com
Blog: http://www.civildigest.com, Twitter: C3Dish
Windows 7 x64, IDS 2014, 2013 & C3D 2012
Intel i7 930 @ 2.8Ghz, 12GB RAM, Nvidia GeForce 9600GT

*Expert Elite*
Alfred.NESWADBA
Posts: 8,982
Registered: ‎06-29-2007
Message 8 of 12 (305 Views)

Re: Map Crashes with DWG

10-24-2012 05:15 AM in reply to: ishkav

Hi,

 

>> When I exit the command and I try to hover over the polygon, the cursor stops

>> at the edge of the polygon and fatal errors

Try to disable ROLLOVERTIPS first and if that is not enough also disable SELECTIONPREVIEW. Let us know if this avoids crashing Map.

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Valued Contributor
ishkav
Posts: 61
Registered: ‎11-15-2007
Message 9 of 12 (303 Views)

Re: Map Crashes with DWG

10-24-2012 06:29 AM in reply to: mekohler

Looks like the rollovertips is the culprit. The thing is that I believe it is tied to the videocard, since I can try the same on another machine that let's say has a Nvidia and I did not get any issues with rollovertips on. So I guess we should all look into certified video cards from now on?

Ishka
CAD Manager
Tom Groll Engineering
Email: ishka@tg-eng.com
Blog: http://www.civildigest.com, Twitter: C3Dish
Windows 7 x64, IDS 2014, 2013 & C3D 2012
Intel i7 930 @ 2.8Ghz, 12GB RAM, Nvidia GeForce 9600GT

*Expert Elite*
Alfred.NESWADBA
Posts: 8,982
Registered: ‎06-29-2007
Message 10 of 12 (299 Views)

Re: Map Crashes with DWG

10-24-2012 06:37 AM in reply to: ishkav

Hi,

 

>> So I guess we should all look into certified video cards from now on?

Maybe? I would start disabling the hardware-acceleration + give us the info what GC you have (including driver-version and what OS you are running).

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.