I have a drawing that I'm having issues with, all of the Lwpolyline that we have in our drawings are not filling in the arrow part.
I have checked to verify that the fill is on, fillmode is on, Apply solid fill is on on the Display tab of options.
It isn't a leader arrow, but I did verify that the Arrowheads are all selected to Closed filled.
Regen does nothting as well.
Any other thoughts.
polyline-widths are not visualized as filled when you don't look vertical onto the object-orienation.
Try command _UCS and then object ==> click onto the poly (that creates a ucs that is parallel to the entity-orientation), then run command _PLAN and option for current ucs. ==> is the lwpoly now filled?
If not please upload a DWG and not a PDF as we can look more into details of your object and ucs and sysvars.
- alfred -
command _PLAN with option _W
Or if you have the viewcube visibile: click on "TOP"
- alfred -
Access a broad range of knowledge to help get the most out of your products and services.
Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.
Upgrading to a 2015 product? Make sure to check these out 1st!