AutoCAD Map 3D General Discussion

AutoCAD Map 3D General Discussion

Reply
*Expert Elite*
AllenJessup
Posts: 6,009
Registered: ‎05-21-2003
Message 1 of 4 (191 Views)

Lidar and Vertical Transformation

191 Views, 3 Replies
08-02-2013 05:14 AM

I have Lidar files both IMG files and LAS files. I work in Civil 3D so have most Map 3D functions. We also have IDSP 2014 so I have a full version of Map 3D 2014 in there. The Lidar is in UTM - Meters. I need to create a Civil 3D Surface in State Plane - Feet.

 

Civil doesn't work with IMG files. I have no problem creating a Point Cloud from the LAS files using that to create a Surface. With the Zones set correctly in the drawings I can get the horizontal aspect of the data into State Plane. However the Elevations are still in Meters. If the LAS files were in ASCII. I would convert them directly, but they're not.

 

Is there any method in Map 3D to do a vertical transformation on either of these file types?

 

Allen Jessup


Civil 3D 2012 SP 3 / IDSP 2014
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600

*Expert Elite*
AllenJessup
Posts: 6,009
Registered: ‎05-21-2003
Message 2 of 4 (177 Views)

Re: Lidar and Vertical Transformation

08-02-2013 07:06 AM in reply to: AllenJessup

I solved it in Civil by exporting to a DEM file and creating a Surface from that. I'd still like to know if there's a better way.

 

Allen

*Expert Elite*
Murph
Posts: 2,017
Registered: ‎11-13-2006
Message 3 of 4 (165 Views)

Re: Lidar and Vertical Transformation

08-02-2013 04:10 PM in reply to: AllenJessup

Allen, I don't know of any way other what was suggected in the C3D forum that you already knew of.

Murph
Supportting the troops daily.
*Expert Elite*
AllenJessup
Posts: 6,009
Registered: ‎05-21-2003
Message 4 of 4 (140 Views)

Re: Lidar and Vertical Transformation

08-05-2013 04:52 AM in reply to: AllenJessup

Thanks Murph,

 

I was just wondering if since I now have a Full version of Map with IDSP if there might be a way with the newer software.

 

Allen

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.