AutoCAD Map 3D General Discussion

AutoCAD Map 3D General Discussion

Reply
Valued Mentor
kevin.barnett
Posts: 391
Registered: ‎08-13-2007
Message 1 of 5 (467 Views)
Accepted Solution

how to create a reference system template

467 Views, 4 Replies
05-29-2013 11:51 PM

Greetings,

 

I would like to utilise the Layout Element: Reference System to draw the grid lines and grid values on paper space viewports.

 

But.

 

I am working in South Africa. The WGS Lo systems are opposite to the northern hemisphere, positive is heading south not north. To solve this, most drawing offices (including ours) just reverse the signs of X and Y values.

 

Now you can see why I cannot use the Layout Element Reference System templates provided with Map. I need to change sign the X and Y text values.

 

How do I create a Reference System Template?

These are provided with Map:

Latitude-Longitude

Military Grid Reference System

United States National Grid

Custom map coordinate system

 

I tried to use 'Custom map coordinate system' but it is a fixed template, it does not provide change sign as needed.

 

Thanks,

All the best to all, Always,

Kevin.

 

From the options you listed, you might not be in the full Coordinate Library.  Try the command MAPCSLIBRARY, and you'll see the LO options that should work for you, with all the relevant zones defined.

 

Swapping X and Y manually is a bit risky (what if the next guy forgets!), so I'd suggest using the query options and assigned coordinate systems to perform automatic CS tranforms.

Valued Mentor
kevin.barnett
Posts: 391
Registered: ‎08-13-2007
Message 2 of 5 (465 Views)

Re: how to create a reference system template

05-30-2013 12:01 AM in reply to: kevin.barnett

Aha!

 

I found the files, under:

 

C:\ProgramData\Autodesk\Autodesk AutoCAD Map 3D 2014\R19.1

 

Now I just need to figure out how to modify it to what I need.

 

Valued Mentor
kevin.barnett
Posts: 391
Registered: ‎08-13-2007
Message 3 of 5 (461 Views)

Re: how to create a reference system template

05-30-2013 12:06 AM in reply to: kevin.barnett

the solution needs to be set somewhere in here:

 

<LabelStyle>
<Format>HostPrec</Format>
<Direction>Aligned</Direction>
<Offset>0.15</Offset>
<TextStyle>
<Font>Arial</Font>
<Height>0.1389</Height>
<Color>ff000000</Color>
</TextStyle>
</LabelStyle>

 

probably the Format field ??

Product Support
NateMoore
Posts: 100
Registered: ‎04-25-2008
Message 4 of 5 (429 Views)

Re: how to create a reference system template

06-03-2013 11:55 PM in reply to: kevin.barnett

From the options you listed, you might not be in the full Coordinate Library.  Try the command MAPCSLIBRARY, and you'll see the LO options that should work for you, with all the relevant zones defined.

 

Swapping X and Y manually is a bit risky (what if the next guy forgets!), so I'd suggest using the query options and assigned coordinate systems to perform automatic CS tranforms.



Nate Moore, GISP
Geospatial Premium Support Specialist
Global Services
Autodesk, Sarl
Valued Mentor
kevin.barnett
Posts: 391
Registered: ‎08-13-2007
Message 5 of 5 (427 Views)

Re: how to create a reference system template

06-03-2013 11:59 PM in reply to: NateMoore

thx .. hopefully I will get a chance to try it today.

 

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.