AutoCAD Map 3D Forum
Welcome to Autodesk’s AutoCAD Map 3D Forums. Share your knowledge, ask questions, and explore popular AutoCAD Map 3D topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to convert rules to AutoCAD layers

1 REPLY 1
Reply
Message 1 of 2
toolbox2
337 Views, 1 Reply

How to convert rules to AutoCAD layers

I've been given a drawing which needs to be converted to an AutoCad drawing. I can do that but I need the thematic rules (defined in the Style Editor) to be transferred to unique AutoCad layers and the layers named according to the corrsponding Legend Label.

eg. in the Style Editor I have rules such as :

"NAME" = building

"NAME" = tree

"NAME" = road

 

So, when I run the MAPTOACAD command I want each of the above to be transferred to AutoCad layers named after the correpsonding Legend Label.

 

Any ideas?

1 REPLY 1
Message 2 of 2
Alfred.NESWADBA
in reply to: toolbox2

Hi,

 

one idea is you connect 3 times to the same datasource (so you have 3 different GIS-Layers).

Then you set a fitler, for layer1 filter to NAME = 'building', layer 2 filter to NAME = 'tree' and so on.

 

HTH, - alfred -

------------------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at ... blog.hollaus.at ... CDay 2024
------------------------------------------------------------------------------------
(not an Autodesk consultant)

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report

”Boost