error messages in chinese in english autocad

[FSJ_Mo]

has anybody ever gotten error messages in chinese when doing a query? We run map 3d 2012 and civil 3d 2012 in Canada?

[cedwards8511]

I've never seen it while doing queries, but when my Map/Raster starts acting up I get Chinese characters showing up in the command line.

[FSJ_Mo]

here is the message I sometimes get when doing queries.

䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㠴㈺ਵ㐀瞤Couldn't find the message 25 in msg database 48

anybody see this before?

[agentornge75]

Apparently, I do.

ʀDzCouldn't find the message 9 in msg database 55
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㔵ㄺਰȀDzCouldn't find the message 10 in msg database 55
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㔵㈺ਵȀDzCouldn't find the message 25 in msg database 55
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㔵㈺ਸ਼ȀDzCouldn't find the message 26 in msg database 55
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㔵㈺਷ȀDzCouldn't find the message 27 in msg database 55
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵ㄺ
€DzCouldn't find the message 1 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵㈺
ɼDzCouldn't find the message 2 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵㌺
ʄDzCouldn't find the message 3 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵㐺
ʄDzCouldn't find the message 4 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵㔺
ʄDzCouldn't find the message 5 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵㘺
ʀDzCouldn't find the message 6 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵㜺
ʀDzCouldn't find the message 7 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵㠺
ʀDzCouldn't find the message 8 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵㤺
ʄDzCouldn't find the message 9 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵ㄺਲȀDzCouldn't find the message 12 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵ㄺਲ਼ȀDzCouldn't find the message 13 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵ㄺ਴ȀDzCouldn't find the message 14 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵ㄺਵȀDzCouldn't find the message 15 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵ㄺਸ਼ȀDzCouldn't find the message 16 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵ㄺ਷ȀDzCouldn't find the message 17 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵ㄺਸȀDzCouldn't find the message 18 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵ㄺਹȀDzCouldn't find the message 19 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㘵㈺ਰȀDzCouldn't find the message 20 in msg database 56
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㠵ㄺ
€DzCouldn't find the message 1 in msg database 58
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㠵㤺
ʄDzCouldn't find the message 9 in msg database 58
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㠵ㄺਰȀDzCouldn't find the message 10 in msg database 58
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㠵㈺
ʀDzCouldn't find the message 2 in msg database 58
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㠵㌺
ʈDzCouldn't find the message 3 in msg database 58
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㠵㐺
ʈDzCouldn't find the message 4 in msg database 58
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㠵㔺
ʈDzCouldn't find the message 5 in msg database 58
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㠵㘺
ʀDzCouldn't find the message 6 in msg database 58
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㠵ㄺ਱ȀDzCouldn't find the message 11 in msg database 58
䵘䱆䉉㨠㜠䤠癮污摩洠獥慳敧渠浵敢⁲㠵ㄺਲȀDzCouldn't find the message 12 in msg database 58

[АлексЮстасу]

I too had yesterday error message in chinese (No. 32?) at creation of topology. And in a message window was much on chinese.

Map/Civil 3D 2012, russian.
Too I wanted to make printscreen, and to ask a question 🙂