AutoCAD Map 3D General Discussion

AutoCAD Map 3D General Discussion

Reply
Active Contributor
jgray
Posts: 40
Registered: ‎01-28-2010
Message 1 of 6 (1,061 Views)
Accepted Solution

Convert connected feature data to real polylines and text

1061 Views, 5 Replies
10-31-2012 07:00 AM

Hello,

In autocad 2013 is the best way still to convert data you have connected to, for example a shapefile, as feature data in order to convert that into polylines and text is the best method saving it all as a seperate drawing using the "save as autocad drawing command"?  Is there way to do it individually in the current drawing so that I do not always have to be saving things out as seperate drawings and then copy and pasting them back into my working drawing?

I guess that really is the second best alternative, is there any more other than doing the save as drawing command and the check out feature geometery command you suggested.  Just looking at all my opitions. 

Distinguished Contributor
bingeomatics
Posts: 216
Registered: ‎04-29-2012
Message 2 of 6 (1,059 Views)

Re: Convert connected feature data to real polylines and text

10-31-2012 07:08 AM in reply to: jgray

I think you need to thos command: _MAPExtractFeatureGeometry

Binnat Khalilov
Active Contributor
jgray
Posts: 40
Registered: ‎01-28-2010
Message 3 of 6 (1,057 Views)

Re: Convert connected feature data to real polylines and text

10-31-2012 07:24 AM in reply to: bingeomatics

I guess that really is the second best alternative, is there any more other than doing the save as drawing command and the check out feature geometery command you suggested.  Just looking at all my opitions. 

Mentor
Robert_Fritz
Posts: 169
Registered: ‎12-08-2011
Message 4 of 6 (1,037 Views)

Re: Convert connected feature data to real polylines and text

11-01-2012 12:00 AM in reply to: jgray

Hi,

 

you could also just import the features you want (applying a spatial or other filter) but you will loose the "style" settings for the imported features. Command: _mapimport

 

Rob

http://raumpatrouille3d.blogspot.ch/
Valued Mentor
parkr4st
Posts: 451
Registered: ‎03-24-2004
Message 5 of 6 (1,033 Views)

Re: Convert connected feature data to real polylines and text

11-01-2012 03:13 AM in reply to: jgray

Why do you want to convert it?  What are you attempting to do with the data?

 

dave

Active Contributor
jgray
Posts: 40
Registered: ‎01-28-2010
Message 6 of 6 (1,027 Views)

Re: Convert connected feature data to real polylines and text

11-01-2012 05:31 AM in reply to: parkr4st

Hey, 

Thanks for interest!  Basically for years I have been using the command Mapimport to bring in shapefile data into drawings because it created for me real polylines and points which I could then save my drawing and email it to a client as needed.  I have randomly fooled around with connecting to the shapefile data through the taskpane and apply styles and creating labels for some of the data that is attached.  I usually about 99% of the time just use the mapimport command because it is easier to work with and send to people but I just wanted to try the other way and see what my options are currently.

 

I only prefer the mapimport method due to the fact that with it when that I email the drawings everthing is contained within the drawing and I don't have to send a shapefile as well.

 

Basically i just wanted to know all my options on converting feature data into real polylines, text, and such and see which one I thought was best. So far I guess I like the "Save as drawing command"...   I wish there was an option to just  "Save as real polylines, text, and hatches, inside current drawing command".

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.