AutoCAD Map 3D General Discussion

AutoCAD Map 3D General Discussion

Reply
Contributor
Peter_NDNG
Posts: 11
Registered: ‎02-22-2012
Message 1 of 4 (262 Views)

Auto Annotate Angles

262 Views, 3 Replies
05-29-2012 09:56 AM

I've been looking for a solution to my problem for a couple of days.  Some backstory, when I started at my current position we had a bunch of building footprints that were generated by a contractor from spotty As-Builts and aerial images (not too thrilled about their methodology).  We need more accurate footrprints for our CAD and GIS integration, and I need to go through and compare the footprint to the As-Builts so we can determine which buildings we need to be resurveyed.  I figured out how to auto annotate the dimensions of the existing footprints that we have using the "QDIM" command.  However, the more I look at the buildings I'm noticing that a number of them aren't square (who would have thought that most buildings are square?), and what I would like to do is automatically annotate all the polyline angles  because currently I'm going through and manually annotating each footprint, but there are hundreds.  Is there a command for this? or am I doomed to days of clicking?

 

Thanks in advance,

Pete

Distinguished Mentor
thepworth
Posts: 525
Registered: ‎03-02-2011
Message 2 of 4 (260 Views)

Re: Auto Annotate Angles

05-29-2012 10:05 AM in reply to: Peter_NDNG

seems like it should be possible by a running routine between each line segment of a polyline and then compare first and last segments - the gurus in the lisp discussion forum are more likely to answer on this one.... I can do it with alignments in C3D & have it as a default lable set for our waterline alignments, so it can be done.  just haven't done it in Map/ACAD.

 

Best of Luck!


C3D 2011
Intel Xeon E5630@2.53Ghz
NVIDA Quadro NVS420 Dual Monitor
12GB Ram / Win7 Professional 64bit SP1
Valued Mentor
parkr4st
Posts: 451
Registered: ‎03-24-2004
Message 3 of 4 (244 Views)

Re: Auto Annotate Angles

05-29-2012 06:01 PM in reply to: thepworth

are you looking for the angle of the line as in s67 degreese or the interior angle between two lines with a common vertex?

 

dave

Contributor
Peter_NDNG
Posts: 11
Registered: ‎02-22-2012
Message 4 of 4 (230 Views)

Re: Auto Annotate Angles

05-30-2012 01:17 PM in reply to: parkr4st

The interior angles from lines with a shared vertex.  I normally work in ArcGIS and there are 3rd party tools to do this, but I work for an organization that has to certify plugins and software, so that's not an option.  Even manually adding in the angle annotation is easier in Map3d.

Announcements
Autodesk Alert | We are currently working on restoring Previous Version License request access in the Autodesk Subscription Center. If you are a subscription customer and would like to request a Previous Version License, please use this link as a temporary workaround. We apologize for the inconvenience and thank you for your patience.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.