AutoCAD LT General Discussion

AutoCAD LT General Discussion

Reply
Member
j_van_damme
Posts: 3
Registered: ‎08-11-2002
Message 1 of 22 (9,968 Views)

INTERNAL ERROR: GEDIT 3.

9968 Views, 21 Replies
08-07-2002 06:21 PM
Hi,
I don't think somebody allready mentioned
an INTERNAL ERROR: GEDIT 3.
'caus after 2 min (every time) drawings
crash, not funny.
Yesterday I disabled Windows file protection...
But I enabled it again, no change...
LT2002, PII-500Mhz, 256MbRAM, Voodoo Banshee,
Never expirienced any immaterial bugs before
for about 10 months now...
Maybe the DumpEntrie in acltstk.dmp will help
to solve this.
I would appriciate any fast responce very much
Jeroen

[AcadCrashDump1]
ExeTimeDateStamp=0x3AE3FFE5
CrashTimeDateStamp=0x3D522697
Version=15.06
WinVer=0x8930005
DumpType=InternalError
ErrorText=GEDIT 3
ContextFlags=0x10007
SegGs=0x0
SegFs=0x3B
SegEs=0x23
SegDs=0x23
Edi=0x26CEEF0
Esi=0x26CEEEF
Ebx=0xA65199
Edx=0x0
Ecx=0x5
Eax=0x69614D5B
Ebp=0x26CEEC4
Eip=0x7C213D
SegCs=0x1B
EFlags=0x200246
Esp=0x26CDFCC
SegSs=0x23
ReferenceAddr=0x92D7C4
ReferenceName=_WinMain@16
StackWalk0=7BBB85,3C113D,1,SymExport,GetViewportInfo+36BD,C:\Program Files\AutoCAD LT 2002\aclt.exe
StackWalk1=7BB980,3BAB85,1,SymExport,ToolbarArxComm+25B25,C:\Program Files\AutoCAD LT 2002\aclt.exe
StackWalk2=599793,3BA980,1,SymExport,ToolbarArxComm+25920,C:\Program Files\AutoCAD LT 2002\aclt.exe
StackWalk3=599290,198793,1,SymExport,ADCHatchSwichBackAcadViewBkColor+8043,C:\Program Files\AutoCAD LT 2002\aclt.exe
StackWalk4=8AE6D1,198290,1,SymExport,ADCHatchSwichBackAcadViewBkColor+7B40,C:\Program Files\AutoCAD LT 2002\aclt.exe
StackWalk5=8AE622,4AD6D1,1,SymExport,getLastWblockDir+5091,C:\Program Files\AutoCAD LT 2002\aclt.exe
StackWalk6=47EC83,4AD622,1,SymExport,getLastWblockDir+4FE2,C:\Program Files\AutoCAD LT 2002\aclt.exe
StackWalk7=483A23,7DC83,1,SymExport,acedSSSetFirst+38FC3,C:\Program Files\AutoCAD LT 2002\aclt.exe
StackWalk8=6CF412,82A23,1,SymExport,scriptbrk+1BC3,C:\Program Files\AutoCAD LT 2002\aclt.exe
StackWalk9=77E92CA8,2CE412,1,SymExport,acedGetUserFavoritesDir+45D82,C:\Program Files\AutoCAD LT 2002\aclt.exe
StackWalk10=77EA1D77,11CA8,1,SymExport,CreateFileA+11B,C:\WINDOWS\system32\KERNEL32.dll
StackWalk11=2C,20D77,1,SymExport,SetTimerQueueTimer+70,C:\WINDOWS\system32\KERNEL32.dll
*Ahava, Petri
Message 2 of 22 (9,968 Views)

INTERNAL ERROR: GEDIT 3.

08-07-2002 06:44 PM in reply to: j_van_damme
Hi,

from Autodesk Knowledgebase:
Issue

      When you execute a command in AutoCAD LT® 2002 software, the following
error message is displayed:

      GEDIT 3



Solution

      This error can occur for the following reasons:

        a.. Out of date Iomega Zip® drivers. Ensure you have the latest
Iomega Zip drivers (V3.1+)
        b.. Intel® LANDesk® Client Manager. The only work-around is to
remove this software to test compatibility.
        c.. Unisysn AutoMateT 4 software. The only work-around is to remove
this software completely and test compatibility.
        d.. TEGAM ViGUARD 2002. The only work-around is to disable the
anti-spyware and Internet traffic monitoring option.
      If the error still occurs, try uninstalling any third-party software
in conjunction with AutoCAD LT 2002, and also try starting Windows® in safe
mode to see if any other software that runs at startup is causing a
conflict.



and:
Issue

      The following error occurs during several nested transparent zooms:

      ACAD ERROR ABORT - INTERNAL ERROR: GEDIT 3

      ERROR HANDLER RE-ENTERED EXITING NOW.
      Internal error: gedit 3

      The program then unexpectedly shuts down and prompts you to save your
drawing.



Solution

      If you complete each ZOOM command before starting another zoom, this
error should not recur. However, if the error does recur, save the drawing
when prompted. Then, the next time you open the drawing, allow the program
to recover it.



HTH

Petri Ahava
CAD-Q Finland
*Support, Autodesk
Message 3 of 22 (9,968 Views)

INTERNAL ERROR: GEDIT 3.

08-12-2002 07:30 AM in reply to: j_van_damme
Jeroen, try the suggestions at the link below for TS67212. If that
doesn't resolve your error, and you have AutoCAD LT 2002, perhaps the
upcoming Service Pack 2 will resolve it. If THAT doesn't resolve it, you
may have a virus on your PC that is causing it. We have found 4 or 5
cases lately where that turns out to be the cause.

If you have not checked lately, you can sweep your system for a virus
from the link on this page: http://security1.norton.com

I'll send the Service Pack 2 directly to you by separate email.

Error: GEDIT 3

http://support.autodesk.com/getDoc.asp?id=TS67212

j_van_damme wrote:

> Hi,
> I don't think somebody allready mentioned
> an INTERNAL ERROR: GEDIT 3.



--
Bob Felton
Autodesk Product Support, Platform Technology Group
New Member
bigdave
Posts: 1
Registered: ‎08-26-2002
Message 4 of 22 (9,968 Views)

Re: INTERNAL ERROR: GEDIT 3.

08-26-2002 07:28 AM in reply to: j_van_damme
Where can I get a copy of this Service Pack 2 repair. Has anyone had any comments reguarding Windows NT and the GEDIT 3 error problem. We are having GEDIT and slow zoom / pan problems with LT 2002 and all machines running NT. We have tried all the suggestions that Autodesk has recommended to no avail.

Big Dave
Raytheon Infrared Operations.
*Support, Autodesk
Message 5 of 22 (9,968 Views)

INTERNAL ERROR: GEDIT 3.

08-29-2002 05:23 AM in reply to: j_van_damme
Dave, I have sent the Service Pack 2 English Unlocked to you by separate
message.


bigdave wrote:

> Where can I get a copy of this Service Pack 2 repair. Has anyone had
> any comments reguarding Windows NT and the GEDIT 3 error problem. We
> are having GEDIT and slow zoom / pan problems with LT 2002 and all
> machines running NT. We have tried all the suggestions that Autodesk
> has recommended to no avail.
>
> Big Dave
> Raytheon Infrared Operations.

--
Bob Felton
Autodesk Product Support, Platform Technology Group
*Saadallah, Dean
Message 6 of 22 (9,968 Views)

INTERNAL ERROR: GEDIT 3.

08-29-2002 06:11 AM in reply to: j_van_damme
Why not put it back in Beta, or Release it, so users can access it without
this happening?

--
Dean Saadallah
http://www.pendean.com
Expanded Links Page
http://www.pendean.com/lt/links.htm
--


"Bob Felton (Autodesk Support)" wrote in
message news:3D6E82CD.CA537929@autodesk.com...
> Dave, I have sent the Service Pack 2 English Unlocked to you by separate
> message.
>
>
> bigdave wrote:
>
> > Where can I get a copy of this Service Pack 2 repair. Has anyone had
> > any comments reguarding Windows NT and the GEDIT 3 error problem. We
> > are having GEDIT and slow zoom / pan problems with LT 2002 and all
> > machines running NT. We have tried all the suggestions that Autodesk
> > has recommended to no avail.
> >
> > Big Dave
> > Raytheon Infrared Operations.
>
> --
> Bob Felton
> Autodesk Product Support, Platform Technology Group
>
>
New Member
esra7
Posts: 1
Registered: ‎01-14-2010
Message 7 of 22 (9,968 Views)

GEDIT 3.

01-14-2010 01:49 AM in reply to: j_van_damme
hi

i have just installed autocad 2002 lt in my computer and i keep getting the internal error: gedit 3. i guess i need the service pack 2 for 2002 lt. but there isnt any link on the site. i would really appriciate if you can send me the sp2.
thanks alot

architect-
esra 7
*Dean Saadallah
Message 8 of 22 (9,968 Views)

Re: GEDIT 3.

01-14-2010 05:42 AM in reply to: j_van_damme
There is no SP2... .

Google GEDIT3, it is a conflict on your system with another app, it may or
may not get resolved, only real 100% fix is to move away from LT2002.

--
Dean Saadallah
http://LTisACAD.blogspot.com
--
Member
DaveMat
Posts: 3
Registered: ‎04-04-2013
Message 9 of 22 (3,981 Views)

Re: INTERNAL ERROR: GEDIT 3.

04-04-2013 11:38 AM in reply to: j_van_damme

I am having the same problem since reinstall ACADLT2000 on my new hard drive Windows XP

Thank you

Dave

*Expert Elite*
pendean
Posts: 22,923
Registered: ‎11-06-2003
Message 10 of 22 (3,975 Views)

Re: INTERNAL ERROR: GEDIT 3.

04-04-2013 01:23 PM in reply to: DaveMat

Fully patch and update LT2000 first.

Dean Saadallah Blog | Facebook | Google+ | Twitter | PINS
Post to the Community

Have questions about Autodesk products? Ask the community.

New Post
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.